HLTNC 3 4 Axis Mach3 System CNC Router Controller Box With DM542 Nema23 Stepper Motor Driver 2.2kw VFD And 500W 36V Power Supply
hlmotion.com
Hardware / Tools

HLTNC 3 4 Axis Mach3 System CNC Router Controller Box With DM542 Nema23 Stepper Motor Driver 2.2kw VFD And 500W 36V Power Supply

$320.00
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

HLTNC

View Store

 4 Axis Controller Box x1 Motor Cable x 4  Spindle Cable x 1  Power Cable x 1  USB cable x 1   CD x 1 If English Manual Needed, Please Contact With Us And Tell Us Your Email Address, We Would Send It To Your Email. 1. Integrated 2. Aviation Connector (Easy to be installed) 3. 500W PSU & 2.2KW VFD ① VFD Control Panel ② Power Switch ③ Pump Switch (Spare) ④ Emergency Stop Button ⑤ USB Interface ⑥ Motor Interface ⑦ Spingle Interface ⑧ Reserved Interface (Hand wheel, proximtiy Switch) ⑨ Power Interface ⑩ Power Supply Fans Call up the programming function code or return to the exit programming status Enter the submenu or data confirmation Multi function button F8.04 Function selection The modification bit of data can be moved in the programming state +Modify number -Modify number The factory default keyboard starts. Press this key to enter the operation state. The FWD light is on Stop button, press this button to reset the fault in case of inverter fault ① REV reverse operation indicator ② By default, this knob is used for 0-50Hz speed regulation ③ FWD forward running indicator When one of the FWD or REV indicator lights is on, it means that the inverter is running Running indicator. The motor can only operate with operating frequency.Some parameters cannot be modified under running status Inverter Paremeter Setting F0.04=400.0 Max frequency Hz F0.05=400.0 Max frequency Hz F4.00=220 Spindle Voltage F4.01=7.0 Spindle Current F4.02=24000 Spindle Speed F4.03=400 Spindle Frequency If your spindle motor is 400hz, three-phase, 220v, 7A, 24000RPM, you can set it as above; if your spindle input voltage is 110v, you can change F4.00=110 Operation Example: Change the ( FUNC ) key function to the reverse start start key 1. Press ( PRG ) to display F0:00 2. Press ( ▶▶ ) ( ▲ ) to change F0:00 to F8.04 3. Press ( ENTER ) to display 0 4. Press (▲ ) to change to display 3 5. Press ( ENTER) to display F8.05 6. Press ( PRG ) to display d-00, and then press ( PRG ) to     return and exit     Setup Complete ( FUNC ) Reverse start button ( RUN ) Forward rotation start button ( STOP ) Stop button

Show More Show Less