Zega Mame Gear Raspberry Pi Mod Pre-Soldered Kit - Zarcade Limited

Created by Zarcade Limited, the Zega Mame Gear is a custom-made drop-in kit that fits perfectly into any Sega Game Gear shell without any modification and no soldering. It runs on a Raspberry Pi 3a+, Zero, Zero 2 and even a CM4 with the optional CM4 adapter, giving you access to thousands of retro games with Retropie. Pre-configured images are available to download so you can enjoy playing without the hassle of setting it up. Powered using one or two lithium batteries and re-charged via USB-C. FEATURES: 4 Front button support Plug and Play External access to USB and SD Card (Optional) Connect to a TV with HDMI out (Optional) Digital Audio Safe shutdown and power-off Battery Level Indicator USB-C Charging Pre-configured images Zega Mame Gear with 3.5" Composite LCD INCLUDED: 1x Mainboard  1x 3.2 inch Serial LCD 1x Digital Audio Board 1x USB-C Powerboard with battery charger, battery level and safe shutdown 1x Speaker 1x 4 wire Mainboard to Power board connector 1x 5 wire Mainboard to Audio board connector 1x Ribbon 1x 3D printed (Resin) Select button pre-soldered to Mainboard 1x HDMI Adapter for Raspberry Pi Zero or Zero 2 PAIRS WELL WITH: Zega Mame Gear Button Bracket Zega Mame Gear Battery Extension Cables 40 Pin Male Header for the Raspberry Pi (2.54 Pitch) DOCUMENTATION: Mame Gear Pre-Install Checks Guide Zega Mame Gear Support Portal Downloads/STL Files/Images Recommend Batteries (Battery is NOT included with this kit and must be purchased separately). You will also need to purchase separately the Battery Extension cables. NOTES: Mame Gear requires a Raspberry Pi with a header. If you have a Pi with a pre-installed header, no soldering required. If not, you will be required to solder the header to the Pi. Although not required, adding the additional 2 front buttons will open up more games to play on the Zega Mame Gear. Some shell modification is required. You can also purchase a ready drilled shell from the Zega store. With the optional Zega Mame Gear expansion board, you can easily access the SD card and connect a USB device such as a Game Controller PCB color may vary.  Raspberry Pi, shell, buttons, membranes, lens, battery not included. WARNINGS: Please ensure you are confident in your soldering ability to attempt this project. Under no circumstances will any refunds/replacements be made if soldering has been attempted.