Neil & Parks 40 Spline Floater Kit

  The Neil & Parks Full Floater Axle Tube Kit is available in 4 3/4", 5", and 5 1/2" wheel bolt patterns with either steel or carbon brake rotors with 40 Spline drive plates. The design features interchangeable Steel or Carbon Fiber rotors, you can buy steel rotors now and easily upgrade to carbon fiber later. The rotors are designed with a "lug" drive so that as the rotors expand they don't stress the hub/rotor causing excessive warpage, a major issue when rotors get overheated. If you've ever tried getting the bolts out of a regular design rotor, you know what we're talking about! Studs can be either steel or titanium with steel or aluminum nuts. Ball bearings are included which are easily upgraded to ceramic for the racer who wants the least friction possible. Available in 40 spline only as that is all you can buy an axle for nowadays. Spindles are extra long for added support and allows the ability to use our "tubeless" rear end housings much easier. Unlike our competition, parts will be available for these for quite some time. Chassis builder discounts apply. Call for upgrades: Ceramic Bearings $626 Titanium splined drive plate insert (Required for most door car applications) $400 Short titanium studs $300 Long titanium studs $400 Install Instructions click HERE Kit includes: Qty 2 - Spindles with Radius Ring Installed Qty 2 - Hubs Qty 2 - 40 Spline Drive Plates Qty 2 - Oil Caps / Drive Plate Cover Qty 2 - Inner Bearings (installed) Qty 2 - Outer Bearings (installed) Qty 2 - Seals (installed) Qty 2 - Brake Rotors, one right, one left if steel, Carbon rotors are identical Qty 2 - Brake Rotor Retaining Rings Qty 20 - 1/4-20 x 1/2 Flat Head Allen bolts to hold brake rotor on Qty 6 - 1/4-20 x 3/4 Socket Head Allen bolts to hold oil cap on Qty 8 - 3/8-24 x 7/8 Flat Head Allen bolts to hold brake caliper bracket on Qty 4 - 3/8-24 x 1 1/8 Grade 8 bolts with washers to hold calipers on Qty 4 - 10-24 x 3/4 Flat Head Allen bolts to hold drive plates to hubs to prevent leaking upon removal of wheels Qty 2 - Hub Retaining Clips Qty 1 - Kit of 10, Lug studs, nuts, and possibly spacers Qty 2 - Small O-Ring for oil cap (installed) Qty 2 - Large O-ring for drive plate (installed) Qty 2- Calipers with pads