LEE Precision .22 cal. SIX Cav Gas Check Mold w/ Handles and Sizing Kit # 90459

img{max-width:100%} 6-Cavity Bullet Mold with Lee Handles and Sizing and Lube Kit 90459+90005 90036+90177  C225-55-RFNewCalibers: .218 Bee / .221 Fireball / .222 Remington / .223 Remington Lee Six Cavity Mold produces a gas checked .225 diameter 55 grain round with flat bllt suitable for .22 cal cartridges. Lee 6-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price.  Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts.   In addition, aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control.  Weights given are Lee's weights with suggested alloy; actual weight may vary due to the alloy mixture used. Material: Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate Features: Tangential cut off which helps to eliminate the nip at the sprue cut off. Cavities: 6Uses .225 Sizing and Lube Kit(not included) + Commercial Mold Handles for 6-Cavity Lee MoldNew 90005Lee Commercial Bullet Mold Handles for 6-Cavity Bullet  Molds are necessary for using Lee 6-Cavity molds which do not ship with handles. This handle has a steel frame and hardwood grips which aredesigned to last a lifetime. Material: Hardened Steel frame, Hardwood grippedFits: Lee 6-Cavity and 12-Cavity Bullet Molds and Lyman Molds Notes: These handles will fit one and two cavitymolds from Lyman and other manufacturers. + Bullet Lube and Size Kit.225 DiameterNew90036+90177The Lee Lube and Size Kit is one of the fastest and easiest ways to lubricate and size cast bullets. The sizing die that comes with the kit fits in any press that acceptsstandard 7/8"-14 threaded dies.Bullets are pushed through the sizing die nose first, so no special toppunches are needed.Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container and a 4 oz bottle ofLee Liquid Alox bullet lube is included. Material: Hardened Steel Sizing Die, Plastic HopperFunction: Size cast bulletsNotes:Comes in red plastic case.Lee recommends bullets be re-lubed after sizing to be sure the sizedportion is coated with Alox.All lead bullets must be lubricated, but it is not absolutely necessaryto size all cast bullets.Bullet must be sized if they are so large that they expand the case toomuch to freely enter the gun's chamber.Sizing sometimes helps accuracy by making the bullet uniform indiameter.Sizing helps insure uniform start pressure and better accuracy.Gas checks can be installed with this tool.Simply place the gas check on the base of the bullet before sizing. Directions for Use: Lubricating Bullets:1. Place bullets in provided red plastic container and drop in the included.Lee Liquid Alox onto the bullets.2. Gently shake the bullets in an orbital motion to coat the bullets.If they do not coat completely, add a little more lube. 3. Spread the bullets onto waxed paper and let dry overnight.4. Load at least one bullet into a case and check to be sure it easily chambersin the gun.If it fits tightly, you must resize the bullet before loading.Directions for Use: Sizing Bullets:1. Screw the sizing die into any standard reloading press.Exact depth is not important.2. Install the bullet punch into the ram.This fits all rams that use standard shellholders.3. Place the red plastic container with the lubed bullets inside on top of the sizing die.4. Place bullet on the punch and push the bullet through the die.5. When 3/4 of the bullets have been loaded, lift the red plasticcontainer off the die. Invert the holder before opening.6. For rifle and hot pistol loads, it is best to re-lube the bullets toensure the sized portion is re-coated. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  We are a Factory Direct Dealer of Lee® Precision, Inc.  ALL MANUFACTURERS WARRANTIES WILL APPLY ! All of our products are BRAND NEW in the box; and contain all of the parts, materials and documentation. You can expect and will receive prompt delivery of your item. We will ship your order within ONE DAY!