OXY-Flex Flue Gas Oxygen Analyzer
gaslab.com
Business & Industrial / Science & Laboratory

OXY-Flex Flue Gas Oxygen Analyzer

$1,559.00
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Gaslab.com

View Store

The Oxy-Flex Oxygen Analyzer is suitable for measuring 0-25% or 0-100% oxygen levels in exhaust pipes, smoke stacks and boiler flues. It can measure the oxygen concentration in air or gas mixtures with temperatures of -100 to 400⁰C. The oxygen sensor element is mounted in the tip of the stainless steel probe and is protected by a stainless steel cap. The IP65 waterproof die-cast aluminium housing accommodates the electronics and provides the interface for the customer to connect to. Features Zirconium dioxide technology provides long-life and low maintenance Configurable outputs: 4-20mA and 0-10Vdc or RS232 Select output measuring ranges; 0-25% O2 or 0-100% O2 Can be calibrated in fresh air or in any known O2 concentration Housed in a sealed die-cast aluminum housing Works at temperatures from -100 to 400⁰C Models OXY-FLEX-0-H - 12mm diameter x 220mm probe length (-100°C to +400°C) OXY-FLEX-0 -  12mm diameter x 220mm probe length (-100°C to +250°C) OXY-FLEX-1-H - 12mm diameter x 400mm probe length  (-100°C to +400°C) OXY-FLEX-1 - 12mm diameter x 400mm probe length (-100°C to +250°C) Specifications Oxygen range (analogue output): 0.1-25% Oxygen, or 0.1-100% O2 Oxygen range (RS232 output): 0.1 and 100%  Accuracy after calibration: 1% O2 Repeatability after calibration: 0.5% O2 Analogue 4-20mA: 0.01mA Analogue 0-10Vdc: 0.01V Digital RS232: 0.01% O2 Response Time: < 15 seconds Warm Up Time (prior to sensor operation): 60 seconds Supply voltage: 24VDC ± 10% Supply current: 500mA max. at 24VDC Digital Output: RS232 Housing temperature limits: -10°C to +85°C Gas temperature limits (probe tip): -100°C to +400°C Probe Length: 400mm (~15.75") Warranty 90 days - See GasLab Terms and Conditions.  DataSheet (pdf) Manual (pdf) Sensor and Interface Selection Guide (pdf) Mounting Options We recommend Swagelok 12mm full-bore adapters. Compression fit via outer nut. See manual for additional mounting instructions. SS-12M0-1-8BT Stainless Steel 1/2 inch NPT Thread mount SS-12M0-1-8WBT Stainless Steel Weld Socket

Show More Show Less