EcoFlow | Relay Module (Smart Home Panel)

Variety is key. Up to 10 home circuits can be connected to the Smart Home Panel for home backup, with varied current ratings for different connected loads.  Installation is simple. Installing and changing relay modules is simple after talking with your electrician and assessing your backup loads.Replace without affecting other circuits. Each circuit features an overcurrent protection fuse and two modules in each module. That means you can swap one out without affecting the other circuits. If a relay module needs to be replaced, the EcoFlow app and the on-unit LED will alert you. How to choose - Load planning: With a Smart Home Panel, selective loads are installed where they will be the most effective during power outages or energy savings management. Consider areas that could have a big impact on comfort, such as the refrigerator and lighting, and choose up to 10 selective loads from your breaker panel based on their load efficiency.- Collect load information: figure out how many load circuits you'll be connecting and how much current they'll draw. If you require assistance, contact your electrician.- Determine how many relay modules you'll need: Select a relay module with the same current rating as the circuit breaker upstream of the load circuit. For the United States and Japan, 15A, 20A, and 30A relay modules are recommended. How to Install STEP 1: Remove the screws on the bottom, side, and top of the Smart Home Panel to remove the front of it. STEP 2: Contractors have installed the relay module at the spot that corresponds to the circuit they plan to use STEP 3:  Secure the relay module by tightening the two screws.   What's in the box 1. Relay Module (Smart Home Panel)