CleanFreak® 'Easy Lift SC' Super Concentrated Floor Wax Stripping Solution (6 Quarts)

We recommend pre-testing CleanFreak 'Easy Lift SC' on a small area before widespread use. It is a concentrated product, so it needs to be diluted at 1 part stripper to 20 parts cold water for most floor finishes (1 quart per 5 gallons of water). First step is to dispense on to the floor and allow it to dwell for 10 minutes. You cannot not allow the stripping solution to dry onthe floor. Make sure to keep the floor wet at all times by using liberal amounts of solution.After allowing the mixed Easy Lift SC solution to dwell on the floor, you'll need to provide agitation and loosen the floor finish. You can do this by using a floor stripping pad and a floor buffer, or an auto scrubber, to full remove all of the layers of floor finish. Picking up loosened finish is most effective with a wet vacuum, but may also be mopped off the floor.Make sure surface is thoroughly rinsed with clean water. Rinse, then scrub with a neutral cleaner to remove remaining residue after rinsing. Then apply a fl