DIY Dana 60 Kingpin Crossover Steering Kit

Dana 60 kingpin crossover steering kit utilizing hd tie rod ends. This is a DIY kit to switch from the short rearward facing drag link on your Chevy or Dodge or any project running a kingpin dana 60 to build a long left to right drag link. This kit is can be used with your factory tie rod, turning your steering into a crossover steering kit. The taper is the standard GM 1 ton on the axle end. The pitman arm will need reamed for the larger diameter of the GM tie rod end or will require drilling and  this insert for the pitman arm end.  The adjustment is easier because we add Hex Head TRE weld bungs so a cresent wrench is your adjustment tool, not a pipe wrench which will scar the tube and if too deep cause a major stress riser. Not to mention what it does to the paint... These are stronger than stock because we use 1.5" X .25" Wall DOM tubing and the TRE's are much more beefy than stock.   You will receive: 1 - 55" of 1.5" X .25" wall DOM tubing1 RH - 7/8" Hex Head Weld Bungs, 18TPI for