27574-Surveyor2, Mini2, Archer 2, Allegro 2/3 Data Collector Rechargeable Li-ion Battery

Surveyor2, Mini2, Archer 2, Allegro 2/3 Data Collector Rechargeable Li-ion Battery Rechargeable li-ion battery for Surveyor2, Mini2, Archer 2, Allegro 2/3 data collectors Voltage 3.6V Capacity 12Ah Includes battery cushion Battery requires a firmware update prior to use. Go to www.junipersys.com/batteryupdate. In July 2018, Juniper Systems updated the battery packs for its Allegro 2 and Archer 2 Rugged Handhelds. If you replace the battery in a handheld that was purchased before July 2018, you will need to install a battery cushion. This will ensure proper contact between the new battery and the handheld. Install the Battery Cushion To install the battery cushion, do the following: Power off the handheld. Loosen the four captive screws holding the battery compartment door in place using a #1 Phillips screw driver. Remove the door. Caution: The Allegro 2/Archer 2 is not sealed against water and dust when the battery door is not installed. Uncover the adhesive on the back of the bat