5450 Flowmeter

Overview The CDI 5450 is a modified version of the 5400 model that allows installation under pressure. It incorporates two valves through which the probes pass and a muffler that collects chips from the drilling process. It takes an equal amount of installation time as our standard meters and requires no shutdown of the compressed-air system. $1,435 – 3,385 Features No system shutdown required Installs in minutes Weather resistant and surge protected Milliamp output Pulse output convertible to threshold output User-configurable scaling, filtering and units of measure Optional wired outputs for networking Housing rotates to suit vertical or horizontal installation The installation of the 5450 is quick, easy and safe, if done with adequate preparation and with care. A solid footing and face protection are essential. Once installed, the meter provides the same features as our 5400-series meters. Technical Specs  Number of Rings 1 Ring Type of Pipe Metric Aluminum, Sch. 40 Steel, Type L Copper Nominal Pipe Sizes 2 in. – 8 in., DN50 – DN200 Accuracy 5 percent of reading plus 1 percent of range for flows from 10 percent to 100 percent of indicated range at air temperatures between 20 and 120 degrees Fahrenheit Fluids Compressed Air, Nitrogen Operating Pressure 130 psig maximum Input Power 250 mA at 24 Vdc Output Resistance 600 Ohms max. Exposed Materials Stainless steel, gold, thermal epoxy and Viton (seal) Ring Material Aluminum Display Four digit LED display Response Time One second to 63 percent of change in value at flows above 30 percent of range. Resources Click the files below to download CDI 5450 Datasheet CDI 5450 Instructions CDI Flowmeter Ranges CDI 5000 Series Wiring CDI Rev. 3 Customization CDI 5450 Installation Video CDI 5450 Shop Drawing