Power Distribution Board Matek Mini PDB/ BEC 5V & 12v

The Mini POWER HUB is designed to provide the highest possible performance and reliability on a 36*36mm and 4-layer PCB. HUB is connected to cameras, servos, video transmitters, LEDs, etc. It distributes power from one battery pack to 4 ESCs, as well as providing synchronized and regulated DC outputs to power them. Batteries can be in the 3S to 6S LiPo range.Features :*2 oz copper and 4 layers of PCB.*ESC and Battery solder tabs in pairs*Solder Bridges in various voltages for camera and VTX.*5V & 12V Output LED indicators and Short circuit tolerance*Input voltage range (3S-6S operation) : 9 - 26VDC*Regulated 5V and 12V outputs*LED power indicators (5V and 12V outputs)*4 ESC outputsESC Outputs :*Continuous Current : 20A per output*Peak Current (10 seconds/minute): 25A Per OutputBEC 5V Output :*Designed for RC Receivers, Flight controllers, OSD and Servos.*DC/DC synchronous bucket regulator, Efficiency up to 95%.*Voltage : 5.0 +/- 0.1VDC*Continuous Current : 3A*Short Circuit Tolerance (10 seconds / minute)*LED (indicates voltage is in regulation)BEC 12V Output :*Battery must be 4S ~ 6S LiPo*Cameras and video transmitters, etc. standard output designed to run.*Voltage : 12.0 +/- 0.2VDC*Continuous Current : 2 Amp (Max.3A 10 sec/min)*Short Circuit Tolerance (10 seconds / minute)*LED (indicates voltage is in regulation)CAM and VTX Voltage Bridge :*3S process. For 12V camera and 12V VTX, select "VCC", VCC = Battery Voltage.*4~6S operation, select "12" for 12V camera and 12V VTX*3~6S operation, select "5" for 5V camera*Video transition from "CAM" pad to "VTX" pad