www.dronecosmo.com
Electronics / Circuit Boards & Components

Matek F722-WPX Flight Controller

$60.99
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

DroneCosmo

View Store

The Matek F722-WPX Flight Controller features STM32F722, MPU6000, DPS310, Pixel OSD, SD Blackbox, 10x PWM outputs, 6x UARTs, I2C, and a Camera switch.\r\nSpecifications\r\n\r\nMCU: 216MHz STM32F722RET6\r\nIMU: MPU6000 (SPI)\r\nBaro: DPS310 (I2C)\r\nOSD: Pixel OSD/FrskyOSD (Uart6)\r\nBlackbox: MicroSD socket (SPI)\r\n6x UARTs(5 Spare) with built-in inversion\r\n1x Softserial_Tx option\r\n10x PWM outputs\r\n1x I2C\r\n4x ADC (VBAT, Current, RSSI, AirSpeed)\r\n1x SH1.0_6pin connector (4V5/G/TX4/RX4/SDA/SCL) for GPS/compass\r\n1x SH1.0_6pin connector for external USB and buzzer\r\nDual Camera Inputs switcher\r\nVbat filtered power ON/OFF switcher\r\nPWM camera menu control: Not supported by INAV\r\nDJI FPV air unit: any spare UART\r\n\r\nPower\r\n\r\n6~30V DC IN (2~6S LiPo)\r\n132A high-precision Current Sense (Scale 250)\r\nPDB/Current sense resistor: 60A continuous, 132A burst.\r\nBEC 5V 2A for FC & Peripherals\r\nBEC Vx 5A for servos, 5V/ 6V option\r\nVbat filtered output 1A for VTx and Camera\r\nLDO 3.3V 200mA\r\nBattery Voltage Sensor: 1:10 (Scale 1100)\r\n\r\nFC Firmware\r\n\r\nINAV target: MATEKF722PX\r\n\r\nPhysical\r\n\r\nDimensions: 44 x 29 x 10 mm\r\nMounting: 25 x 25mm, Φ2mm\r\nWeight: 20g w/ bottom plate and USB/buzzer adapter\r\n\r\nLayout\r\n\r\nIncludes\r\n\r\n1 x FC F722-WPX\r\n1 x USB(Type-C)/Buzzer (Active) Adapter\r\n1 x Bottom plate, 44 x 29mm\r\n2 x JST-SH-6P to JST-SH-6P cables, 20cm\r\n5 x Brass standoffs, M2*4mm\r\n10 x screws, M2*3.5mm\r\nDupont 2.54 pins (Board is shipped unsoldered)\r\n

Show More Show Less