Active Concealed Rod, 60/92 Mortise Lock, No Faceplate - PGT

PGT Active Concealed Multi-point lock Rod Version, 60mm, No FaceplateThis mortise lock is used exclusively on PGT Doors and has 5/16-18 Coupling Thread:To Replace lock the stile needs to be removed.Type: Active Door LockVersion: Concealed Rod / ShootboltsBackset: 2-3/8 inch (60mm)Faceplate Attached: NO, Mounting plate has Radius cornersFaceplate Width: N/AFaceplate Length: N/AStandoff: Short, 3/8 Thick PlasticCoupling Thread: 5/16-18 ( silver Color )How to Operate Lock: 1. Lift handle to Extend vertical shootbolt rods2. Turn Key or Thumbturn to extend deadbolt and secure rods in locked position3. Reverse process to unlock door.Operation of Lock: Baby Sitter functionThis lock can be used in 2 different ways1. When the door is closed the deadbolt can be thrown without lifting the door lever and used as a standard deadbolt lock.When the handle is lifted the shootbolts will extend and will not retract until after the deadbolt is unlocked.It is not necessary to use the locking rods unless desired2. The lever can be lifted to engage the concealed rods and then throw the deadbolt.to unlock door, retract deadbolt with key or Thumb turn, then push down on lever to retract rods and open door.Change Handing:1. Insert screw driver into slot behind latch2. Pull down on handing release, latch pops out3. Rotate latch and push back into lock caseAlways Check Function of lock before closing door How to Rehand an Ashland Multipoint Lock (Marvin Doors) Rehanding Ashland Multipoint Locks