ALT Impact - Polaris 2016-2025 Axys/Matryx 36" Chromoly True Clearance Arm Kit with 1" LIFT Spindles

ALT Impact - Polaris 2016-2025 RMK Axys/Matryx 36" Chromoly True Clearance Arm Kit with 1" LIFT Spindles. Description *** SEE ORDER RECOMMENDATION BELOW 2016-2025 Axys/Matryx 36″ True Clearance Arm Kit with 1″ Lift Spindles All standard colors are in stock and ready to ship.  The rod end design is a huge advantage allowing you, in most cases, to simply unscrew them after an impact replace the rod end with your spare and continue to ride without replacing a full A-Arm. NOT guaranteed but proven to work at least 75% of the time. This is a “TRUE” ground clearance arm, both tubes are arched unlike others on the market that have the front tube arched and rear tube not. This kit is a direct stock replacement with the same geometry as the stock 2019 850, utilizes stock shocks (16 or 16.625). This kit works with the stock sway bar. Our upper A-arm design with a fairly wide radius will accommodate ANY stock or aftermarket shocks even with piggyback reservoirs. This is a COMPLETE kit that comes with all new hardware, you do not need to press out or reuse any stock components. 2 Alternative Impact Light Weight 1″ Lift Spindles 2 Lower arms with preinstalled delrin bushings 2 Upper arms with preinstalled delrin bushings 2 lower 5/8″ rod ends one piece with misalignment bushing built in 2 5/8″ jam nuts 2 1/2″ upper studded rod ends 2 1/2″ jam nuts 4 12mm nylon nuts 2 12 mm sway bar mounting bolts 2 8mm lower shock nylon nuts 2 Titanium bolts 2 Titanium nuts Additional information: ***We STRONGLY Recommend purchasing additional upper and lower Rod Ends as these are designed to be the failure point to help prevent the loss of an A-Arm. Weight 17 lbs Dimensions 12 × 16 × 4 in