Shuttle Barebone System DS57U Up to 16GB DDR3 Intel HD Compatible Windows 8 - Windows 7

Shuttle Barebone System DS57U Up to 16GB DDR3 Intel HD Compatible Windows 8 - Windows 7

$264.00
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}

Fanless and Silent Passive cooling, no fan noise at allPerfect to be used in noise-sensitive environmentsFanless, dust-free and thus virtually maintenance-free Low Power Consumption Power consumption: idle: 12.5 W, full load: 17 / 26.5 W (without/with graphics) (measured with 2x 2GB SO-DIMM, 60 GB 2.5" SSD) 24/7 Nonstop Operation This device is approved for 24/7 permanent operation. Requirements: - Free circulation of air amongst the PC must be guaranteed. - Ventilation holes must stay clear. - If a hard disk is installed, this must also be approved for permanent operation by its manufacturer Chassis Slim-PC (Nettop) with black chassis made of steelWithout cooling fan, passive cooling onlyThe bays for memory, 2.5" drives and Mini-PCIe cardscan be easily accessed by removing two cover plates. Dimensions: 200 x 165 x 39.5 mm (LWH) equal 1.3 litresWeight: 1.43 kg net and 2.13 kg grossTwo holes for Kensington Lock and numerous threaded holes (M3) at both sides of the chassis Operation Position 1) Device must only be used in vertical position with the DisplayPort port facing up2) Please make sure to use either the supplied feet or the VESA mount Operation System This barebone system comes without operating system. It is compatible with Windows 8, Windows 7 and Linux 8 Supports 32- and 64-bit. Processor Model: Intel Celeron 3205U (ULV) System-on-a-chip architecture (SoC): no chipset requiredCode name: Broadwell (5th Generation Intel Core) Cores / Threads: 2 / 2Clock rate: 1.5 GHzL1/L2/L3 Cache: 128 kB / 512 kB / 2048 kBMemory controller: DDR3L-1600 Dual Channel (1.35V) TDP wattage: 15 W maximumManufacturing process: 14 nmMaximum Tjunction Temperature: 105CIntegrated Intel HD graphics engineSupports 64 Bit, VT-x, VT-d, Enhanced SpeedStep, NX bit, SSE 4.1/4.2 Integrated Graphics Intel HD graphicsTwo digital audio/video ports: DisplayPort 1.2 7 and HDMI 1.4aClock rate: 300-800 MHzMaximum resolution: 2560 x 1600Execution Units (EU): 12Supports two independent screensSupports DirectX 11.2, OpenCL 1.3/2.0, OpenGL 4.3Supports DisplayPort 1.2, HDMI 1.4aSupports full AVC/VC1/MPEG2 hardware decodingSupports HD video plus multi-channel digital audio via a single cableDynamic, shared memory: up to 1632 MB Mainboard / BIOS Shuttle Mainboard FS57All capacitors are high quality solid capacitorsSupports resume after power failure 6 Supports Wake on LAN (WOL) Supports Power on by RTC AlarmSupports boot from USB devices and SD card readerAMI BIOS in 8 MByte EEPROM with SPI interfaceSupports hardware monitoring and watch dog functionSupports Unified Extensible Firmware Interface (UEFI) The firmware supports two boot modes: Legacy BIOS and UEFI Power Adapter External 65 W power adapter (fanless) Input: 100-240 V AC, 50/60 Hz, max. 1.6 AOutput: 19 V DC, max. 3.42 A, max. 65 WDC Connector: 5.5/2.5mm (outer/inner diameter) Memory support 2x SO-DIMM slots with 204 pinsSupports DDR3L-1333 (PC3-10600) and DDR3L-1600 (PC3-12800) SDRAM at 1.35VSupports Dual Channel modeSupports a maximum of 8 GB per DIMM, maximum total size: 16 GBSupports two unbuffered DIMM modules (no ECC) Caution: This mainboard does only support 1.35V DDR3L memory modules. Note: DDR3L has a lower operation voltage compared to DDR3 Mini PCIe Slots Two Mini PCI Express expansion slots: full size and half size1) the half size slot is occupied by a WLAN module2) the full size slot supports PCIe 2.0, SATA 3G and USB 2.0 and can either be used for a Mini-PCIe card or for a Mini SATA (mSATA) flash memory card 3 Please use the "Mini-PCIE / mSATA Select" function in the BIOS setup. Audio Audio Realtek ALC 662 High-Definition AudioTwo analog audio connectors (3.5mm) at the back panel: 1) 2 channel line out (head phone) 2) microphone inputDigital multi-channel audio output: via HDMI and DisplayPort Dual Gigabit LAN Dual network with two RJ45 portsUsed network chips: 1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface2) Intel i218LM PHY connected to the MAC of the processorSupports 10 / 100 / 1.000 MBit/s operationSupports WAKE ON LAN (WOL) Supports network boot by Preboot eXecution Environment (PXE) Wireless Network (WLAN) Built-in Mini-PCIe WLAN card (half size) and internal antennaSingle-Chip 1T1R WLAN Controller Realtek RTL8188EESupports IEEE 802.11b/g/n, max. 150Mbps up-/downstreamSecurity: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i 2.5" Drive BaySupports one Serial ATA hard diskor one SATA SSD drive in 6.35cm/2.5" formatDevice height: 9.5 or 12.5 mm (max.) Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidthSupports Unified Extensible Firmware Interface (UEFI) Note: no Serial ATA cable is required Card Reader Integrated SD card reader Supports SD, SDHC and SDXC memory flash cardsSupports booting from SD card Front Panel connectors 4x USB 2.02x RS232 serial ports (5V/12V, 1x switchable to RS422 / RS485) 1 covered with black plastic capsSD card reader (supports SD, SDHC, SDXC) Power buttonPower LED (blue) HDD LED (yellow) Back Panel connectors DisplayPort 1.2 7 HDMI 1.4a2x USB 3.02x Gigabit LAN (RJ45) Microphone inputAudio Line-out (headphone) DC-input connector for external power adapter4-pin connector "SW2" (2.54 mm pitch) for power button, Clear CMOS and 5V DC 4 Perforation for optional Wireless LAN antennas (2 holes) Onboard connector EDP1 - Embedded DisplayPort (eDP, 2x15 pin) 2 Always-On Jumper By removing Jumper J7 (please refer to the quick user guide) the system will start unconditionally once power is applied. 6 Scope of Delivery Multi-language user guideTwo metal feet with four screws M3 x 7VESA mount for 75/100mm standard (two metal brackets) Four thumbscrews M3 x 5 mm (screws together VESA mount and PC) Four screws M4 x 10 mm (to fix the VESA mount to the external surface) Rack (to mount a 2.5" storage in the bay) with three screws M3 x 4 mmDriver DVD (Windows 8.1 / 8 / 7 for 32- / 64-bit) External power adapter with power cord Conformity/Certifications EMI: FCC, CE, BSMI, C-TickSafety: CB, BSMI, ETLThis device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines: - EMV-guideline 89/336/EWG electromagnetic tolerance- LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits Item Dimension (L"xW"xH"): 7.5 x 6.5 x 1.7 Weight:4.8 lbWarranty Information: 3 YEARS

Show More Show Less