4" Marquise LED Remodel Housing, 1250 Lumen

Remodel four inch housing for installation into existing sheet rock ceilings where access is only available from below the ceiling. For use in non-insulated ceilings, where insulation can be kept 3 from fixtures. Rated for use with a line voltage lamp. The Comfort Dim option color tunes the temperature from a bright 2700K to a romantic and comfortable 1800K on a gradual, even curve that mimics incandescent lighting.Download Specification SheetSpecifications 0.050 white baked enamel one-piece drawn aluminum housing adjusts to a ceiling thickness from 3/8 to 1-3/8. Housing terminates at a 1/4 ceiling flange for even positioning of housing angle within the ceiling. Structural arm consists of 0.050 steel and connects to housing with j-box and ballast. Integral springs brackets provided. Non-IC housings require a minimum clearance of 3 from thermal insulation and 1/2 from adjacent building components Air tight (AT) housings have factory installed gaskets to restrict airflow from room into ceiling plenum to Four high tension tempered steel springs secure remodel housing to ceiling. (Hole cutout template provided for convenience). Prewired 15 cubic inch 0.060 thick galvanized steel, with six 1/2 knockouts, four Romex pryouts, and snap on cover. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).