[UA-SK-Gate] Ubiquiti Networks UniFi Gate Access Starter Kit

Control a vehicle gate using the connected Intercom and authorize gate access with License Plate Unlock when paired with a compatible Protect AI camera. (1) Gate Hub (1) Intercom (1) PoE++ adapter (2) 2-wire PoE extenders *Note. License Plate Recognition is supported on Protect AI Series cameras, excluding 360 lenses. Installation Guide: Documentation  Technical Specifications:    UA-HUB GATE MECHNICAL Dimensions  175 x 126 x 26 mm (6.9 x 5 x 1") Weight 460 g (1 lb) Enclosure material Polycarbonate Mounting Din-rail (Included) HARDWARE Networking interface (5) 10/100/1000 Base-T Power Method PoE++UL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU Max. power consumption Without PoE output: 22WWith PoE output: 50W PoE input 50V DC, 1A PoE output PoE passthrough, (4) PoE, 50V DC, Max. 28W LEDs White/blue Digital input Gate exit request, gate position, side door exit request, side door position, emergency Dry output relay (2) Operator: rated 30V DC, up to 1A(1) Aux: rated 30V DC, up to 1A Output relay Side door lock: 12V DC, up to 1A Operating environment Indoor use only with device itselfOutdoor use with waterproof junction box Button (1)Factory reset Ambient operating temperature -30 to 60° C (-22 to 104° F) Ambient operating humidity 5 to 90% noncondensing UL 294 level Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. CAN/ULC-60839-11-1 Grade Grade assignment: 1 Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level UA-Hub-Gate, V01 LEDs PoE in Steady white: Pending adoptionSteady blue: AdoptedAlternating white/blue: Firmware updating PoE out Blinking white: Active signal Input terminals  Blinking white: Active signal Output relays Blinking white: Relay triggered UA-G2 MATERIAL Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") Weight 82 g (2.9 oz) Enclosure material Polycarbonate, glass Mounting In wall, gang box Weatherproofing IP55   HARDWARE Networking interface (1) 10/100 MbE RJ45 port Connectivity  BLE 4.1 Power method PoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU Supported voltage range 48V DC Max. power consumption 5W ESD/EMP protection Air: ±15kV, contact: ±8kV Sensors Proximity sensor Speaker (1) 8 ohm, 0.7W LEDs Steady white: Pending adoptionSteady blue: AdoptedAlternating white/blue: Firmware updatingStrobing red: Emergency lockdownSteady green: Emergency evacuation(2) Rapid flashing blue: NFC credential authenticated(2) Rapid flashing red: NFC credential authentication failedBreathing blue: Ready to register NFC cards Button (1) Factory-reset NFC frequency 13.56 MHz NFC read range < 30 mm NFC standards ISO 14443A, 14443B, 15693 NFC technology NFC Tag 1,2,3,4,5MIFARE ClassicMIFAREPlusMIFARE UltralightMIFARE DESFire Operating environment Outdoor use Ambient operating temperature -30 to 45° C (-22 to 113° F) Ambient operating humidity 5 to 90% noncondensing UL 294 level Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. CAN/ULC-60839-11-1 Grade Grade assignment: I Certificate CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level UA-G2/UA-G2-Black, V02 UA-INTERCOM MECHNICAL Dimensions 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1") Weight Device: 965 g (2.1 lb)Bracket: 445 g (1 lb) Enclosure material Aluminum alloy, UV-stabilized polycarbonate, glass Mount Material Powder-coated stainless steel Mounting Wall mount, adapter to the gooseneck pedestal (Included)Surface angle mount, flush mount (Optional)Sunshield kit (Optional) Weatherproofing  IP65 HARDWARE Networking interface (1) GbE RJ45 port Connectivity  Bluetooth 4.2NFC Power method PoEUL 294 Power-limited Class 2 PSUUL 60950-1/62368-1 LPS/PS2 PSU Supported voltage range 48V DC Max. power consumption 13W ESD/EMP protection Air: ±15kV, contact: ±8kV Sensors Proximity sensorALS sensor Camera 3264 x 2448, 8 MPH: 79.4°, V: 97.5°, D: 118.2° Display 177 mm (7") diagonal Resolution  1024 x 600 (16:9) Display luminance Max. 1000 nits (typical) Touch screen technology Capacitive multi-touch Microphone Yes Speaker (1) 4 ohm, 2W LEDs Amber Button (1) Factory-reset NFC frequency 13.56 MHz NFC read range < 30 mm NFC Standards ISO 14443A, 14443B, 15693 NFC technology NFC Tag 1,2,3,4,5MIFARE ClassicMIFARE PlusMIFARE UltralightMIFARE DESFire Ambient operating temperature Device: -30 to 60° C (-22 to 140° F)Display:* -25 to 60° C (-13 to 140° F)*The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v 1.0.66) Operating environment Outdoor use Ambient operating humidity 5 to 90% noncondensing Software information The software version of a product can be checked at https://unifi.ui.com UL 294 level Destructive attack: Level ILine security: Level IEndurance: Level IStandby power: Level I UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. CAN/ULC-60839-11-1 Grade Grade assignment: I Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level UA-Intercom, V01 UACC-Extender-2Wire-PoE-Tx/RxMechanical Dimensions 40 x 105 x 25 mm (1.6 x 4.1 x 1") Weight PoE in: 77 g (2.7 oz)PoE out: 79 g (2.8 oz) Enclosure material Polycarbonate Mounting material Polycarbonate HARDWARE Networking interface (1) 10/100 MbE(1) Homeplug AV pOWER METHOD PoE++ Max. power consumption 3W (Without PoE output) Poe input (1) PoE++, 50V DC, Max. 1.2A Poe output (1) PoE+, 48V DC, 0.72A ESD/EMP protection Air: ±8kV, contact: ±4kV LED White Ambient operating temperature -10 to 40° C (14 to 104° F) Ambient operating humidity 5 to 95% noncondensing Certifications CE, FCC, IC U-PoE++Specifications Model U-PoE++ Dimensions 106 x 63 x 34 mm (4.2 x 2.5 x 1.3") Weight 210 g (7.4 oz) Output voltage 48V DC @ 1.25A LAN activity indicator No Gigabit LAN port Yes Remote reset capability No Reset button No Rated voltage 100—240V AC @ 50/60Hz Input current 1.3A @ 120V AC0.75A @ 230V AC Inrush current <100A peak @ 120V AC<200A peak @ 230V AC Efficiency 85+% Output ripple 1% max. Switching frequency 65 kHz Line regulation ≤ 1% Load regulation ≤ 3% 2-pair powering No 4-pair powering Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-) AC connector IEC-320 C6 Data In / PoE RJ45 shielded socket Surge protection Difference and common mode Clamping protection 11V data, 60V power Max. surge discharge 1500A (8/20 μs) power Peak pulse current 36A (10/1000 μs) data Shunt capacitance <5 pF data Response time <1 ns Power method Universal AC input, 100—240V AC, 50/60 Hz Power supply AC/DC Supported voltage range 100—240V AC Max. PoE+ wattage per port by PSE 60W Ambient operating temperature 0 to 40° C (32 to 104° F) Storage temperature -30 to 70°C (-22 to 158° F) Ambient operating humidity 10 to 95% noncondensing Certifications CE, FCC, IC, UL, UKCA, KC, CCC, KC, RoHS Software Management application UniFi Access: Version 2.1.5 and laterUniFi Protect: Version 4.0.33 and later