Crux SWRGM-49S Radio Replacement Interface with Steering Wheel Control Retention for GM IOS, IOT, IOU Vehicles 2019 – Up

Crux SWRGM-49S Radio Replacement Interface with Steering Wheel Control Retention for GM IOS, IOT, IOU Vehicles 2019 – Up The CRUX SWRGM-49S is a Radio Replacement interface for select General Motors vehicles 2019 - Up that use a 56 pin connector. It facilitates the integration of an after-market radio to retain factory features in GM IOS, IOT, or IOU bus vehicles. This enhanced interface is also pre-programmed for retention of steering wheel controls General Features:  – Retains chime functions.– Pre-programmed to retain factory Steering Wheel Controls– RAP (Retained Accessory Power).– Provides illumination, parking brake, reverse, and speed sense outputs.– Made for non-amplified vehicles or vehicles that will have their amps bypassedNote:– Does not retain Bose amplifier.– Does not retain OnStar.Note:- Does not retain Bose amplifier.– Does not retain OnStar Compatibility Notes: CADILLAC2019 – UP  XT4 CHEVROLET 2019-Up  Blazer*2019-Up  Camaro*2019-UP  Colorado2019-Up  Equinox*2019-Up  Malibu*2019-Up  Silverado*2019         Volt GMC2019-Up   Acadia*2019-Up  Canyon2019-Up  Sierra 1500*2019-Up  Terrain* NOTE: Compatible with the following radio codes: IOS, IOT, or IOUNote: The radio code can be found in the Glove Box.Note: Newer model GM vehicles are now using a QR code label. If the Service Parts Identification Label is not located in the Glove Box, reference the Vehicle Certification Label on the driver’s door jamb opening for the QR code. ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov