Tascam BD-MP1MK2 Blu-Ray and Media Player
The compact, 1-U rack mountable BD-MP1MKII supports a wide range of media formats via Blu-ray, DVD, and CD discs as well as playback of multiple video, still image, and audio formats from SD cards and USB memory—enabling users to incorporate a rich selection of content from a variety of sources. Supported media and file formats include Blue-ray, DVD, CD, Video, Image, and Audio. As an upgrade to the original BD-MP1, the BD-MP1MKII's SD card maximum capacity has been increased from SDHC (32GB) to SDXC (512GB) and as a result, can handle significantly more data.Equally notable, the BD-MP1MKII's Power-on Play feature enables content to automatically begin playing immediately on power up, without having to engage the unit's Play feature. With Power-on Play active and Repeat Mode set to 'On,' content will automatically start, loop, and play continuously until the system power is turned off—making the BD-MP1MKII an exceptional choice for providing content without users having to constantly check on the unit. Further, the BD-MP1MKII provides a seamless Repeat function that can be defined by chapter, title, or A-B repetition.Another notable BD-MP1MKII feature is the Hide Menu function, which facilitates customization of the display monitor's boot up process. With Hide Menu enabled, the monitor display screen can be set to display a black screen during start up rather than displaying the manufacturer's standard factory setup screen and source select menus. This feature prevents any unwanted visual distractions during system start-up. Features Supports playback of various formats of Blu-ray, DVD, and CD discs Supports playback of various video, still image, and audio formats from SD cards (SD/SDHC/SDXC up to 512G) and USB memory Power on play function Seamless repeat function: by chapter, title, or A-B repetition Hide MENU function to display only the main contents on the screen Lock functions: panel, IR, and tray lock HDMI output that can pass through audio formats such as Dolby Atmos and DTS-HD to an AV amplifier Dual XLR balanced and RCA unbalanced outputs RCA 7.1ch audio outputs External remote control via LAN or RS-232C 1U rackmount size Specs Disc Media *SL indicates single-layer discs and DL indicates doublelayer discs*This unit can play only BD and DVD-VIDEO that has the same region code as shown on the label on its chassis. It can also play DVD-VIDEO that is ALL. Blu-ray BD25, BD50, BD-ROM, BD-R(SL,DL), BD-RE(SL,DL) DVD DVD-ROM, DVD-R (SL, DL), DVD-RW, DVD+R (SL, DL), DVD+RW CD CD-DA, CD-R, CD-RW Disc formats *Blu-ray 3D supported Blu-ray BDMV, BDAV DVD DVD-Video, DVD-VR, AVCHD File formats *USB flash drive and SD card formats must use FAT16,FAT32, exFAT or NTFS file systems. Video ASF, MPG, AVI, 3GP, DAT, MKV, MOV, M2TS, OGM, TP, TS, MP4, WMV Audio WAV, MP3, WMA, AAC, FLAC, APE Picture JPEG, GIF, PNG Supported subtitle file format .sub, .ass, idx+sub (.idx+.sub) Audio BD/DVD/USB/SD Sampling frequency 44.1k/ 48k/ 64k/ 88.2k/ 96k/176.4k/ 192k Hz Bit length 16/24 bit CD Sampling frequency 44.1k/48k Hz Bit length 16/24bit MP3/WMA Sampling frequency 32k/44.1k/48k Hz Bitrate MP3 112k to 320k bps WMA 48k to 192k bps HDMI Output Connector HDMI 19pin Type A Resolution 480i/576i, 480p/576p, 720p, 1080i, 1080p Aspect ratio 16:9 Full, 16:9 Normal, 4:3 Pan & Scan, 4:3 Letterbox Video format NTSC, PAL, Multi HDMI signal system RGB PC level, RGB Video level, YCbCr(4:4:4), YCbCr(4:2:2) Digital Audio output COAXIAL Connector RCA pin jacks Format IEC60958-3(S/PDIF) Output impedance 75 Ω or lower Analog audio outputs Balanced Connectors XLR-3-32(1 : GND, 2 : HOT, 3 : COLD) × 2 (Stereo) Normal output level +4dBu (1.23 Vrms) Maximum output level +20dBu (7.75 Vrms) Output impedance 200Ω or lower Unbalanced Connector RCA pin jack × 1 pair Normal output level -10dBV (0.316 Vrms) Maximum output level +6dBV (2.0 Vrms) Output impedance 210Ω or lower 7.1ch Audio outputs Connector RCA x8 (FL/FR/SL/SR/SBL/SBR/C/SW) Connector Color FL/SL/SBL: WhiteFR/SR/SBR: RedC/SW: Black Normal output level -10dBV (0.316 Vrms) Maximum output level +6dBV (2.0 Vrms) Output impedance 210Ω or lower RS-232C Connector D-sub 9pin Format RS-232C compliant ETHERNET Connector RJ-45 Protocol 10BASE-T/100BASE-TX Cable Category 5e or faster USB Connector USB type-A ×2 (front ×1, back ×1) Protocol USB2.0 compliant Rated supply voltage DC 5V, 1A Mass storage class Less than 2 TB File format FAT16/FAT32/exFAT/NTFS USB device class Mass storage class SD slot Supported media SD (512 MB-2 GB), SDHC (4 GB-32 GB), SDXC (64GB - 512GB) File format FAT16/FAT32/exFAT/NTFS Power AC100 - 240V, 50 - 60Hz Power consumption 30W Dimensions 482.6(W) × 44(H) × 280.7(D) mm Weight 2.64kg Operating temperature range 5 to 35°C (41°F - 95°F) Included items BD-MP1MKII × 1Power cord × 1Wireless remote control (TASCAM RC-BDMP1MKII) × 1AAA batteries × 2Rackmount screw kit- Rackmount ears (left and right) × 2- Screws for ear attachment × 6- Screws for attachment to rack × 4- Washers (for rack) × 4Owner's manual (including warranty) × 1