Crestron HD-TX-4KZ-101-1G-W DM Lite® Transmitter for HDMI® Signal Extension over CATx Cable, Wall Plate, White Textured

End of Sale Date: 6/28/24 Limited Supply Available, please see replacement HD-TXC-4KZ-101-1G-W This white HD-RXC-4KZ-101-1G-W is a DM Lite® 4K60 4:4:4 wall plate receiver designed to interoperate with a DM Lite® transmitter or DMPS Lite™ switcher for the transmission of HDMI®, RS-232, and IR signals. A CAT5e or higher twisted pair cable is used to connect the HD-RXC-4KZ-101-1G to the DM Lite transmitter or DMPS Lite switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1 The HD-RXC-4KZ-101-1G is available in black (model HD-RXC-4KZ-101-1G-B). Interoperability with a DM Lite Transmitter or DMPS Lite SwitcherThe DM Lite input port of the HD-RXC-4KZ-101-1G must be connected to a DM Lite output port of a DM Lite transmitter or DMPS Lite switcher. Examples of supported DM Lite 4K60 4:4:4 transmitters are the HD-TX-4KZ‑101, HD-TX-4KZ‑111, HD-TXA-4KZ‑101, HD-TXC-4KZ‑101, and HD-TXCA-4KZ‑101. Supported DM Lite 4K60 4:2:0 transmitters are the HD-TX-101‑C‑E, HD-TXC-101‑C‑E, HD-TX-301‑C‑E, HD-TX-101‑C‑1G‑E, HD-TXC-101‑C‑1G‑E, and HD-TX-201‑C‑2G‑E. Supported DMPS Lite switchers are the HD‑PS622, HD‑PS621, HD‑PS402, and HD‑PS401.The HD-RXC-4KZ-101-1G can be configured and controlled only when it is used with a DMPS Lite switcher. The web interface of the switcher can be used to configure the HD-RXC-4KZ-101-1G. In addition, control system programming and .AV Framework™ software support of the HD-RXC-4KZ-101-1G is hosted by the switcher. 4K60 4:4:4 and HDR SupportThe HD-RXC-4KZ-101-1G supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported. One-Gang Wall Plate DesignThe HD‑RXC‑4KZ‑101‑1G is designed to mount into a 1-gang U.S. electrical box or plaster ring (not included). The HD-RXC-4KZ-101-1G can receive power from the remote DM Lite transmitter (surface mountable only) or DMPS Lite switcher. Features Interoperability with a DM Lite® transmitter or DMPS Lite™ switcher Point-to-point extension of HDMI®, RS-232, and IR signals over a CAT5e or higher cable DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals 4K60 4:4:4 capability HDR10, HDR10+, and Dolby Vision® video formats Compliance with HDCP 2.3 CEC (Consumer Electronics Control) pass-through capability Bidirectional RS-232 and IR pass-through capability EDID pass-through capability One-gang wall plate design with black finish Decorator style faceplate required (FP-G Series sold separately) Power from the remote DM Lite transmitter (surface mountable only) or DMPS Lite switcher Specifications Video Input Signal Type DM Lite® with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2 Output Signal Type HDMI® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support2 (DVI compatible4) Copy Protection HDCP 2.3 Resolutions Common resolutions are listed in the following table. Scan Type Resolution Frame Rate Color Sampling Color Depth Progressive 4096x2160 DCI 4K & 3840x2160 4K UHD 24 Hz 4:4:4 12 bit 30 Hz 4:4:4 12 bit 60 Hz 4:2:2 12 bit 60 Hz 4:4:4 8 bit 2560x1600 WQXGA 60 Hz 4:4:4 8 bit 1920x1080 FHD 1080p 60 Hz 4:4:4 12 bit Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 12 bit Note: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz. Audio Input Signal Type DM Lite Output Signal Type HDMI Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels Communications HDMI HDCP 2.3, EDID, CEC pass-through DM Lite HDCP 2.3, EDID pass-through RS-232 2-way serial pass-through up to 115.2k baud (TD/RD only) IR Bidirectional IR signal pass-through up to 60 kHz Connectors IR IN/OUT (1) 4-pin 3.5 mm detachable terminal block;Comprised of (1) IR input port and (1) IR output port;IR IN is for connection from a Crestron IR control port or other IR signal source and passes the IR input signal to the IR OUT port on the DM Lite transmitter;IR OUT is for connection to an IR emitter (IRP2, sold separately) and transmits the IR signal from the IR IN port on the DM Lite transmitter;Supports IR up to 60 kHz COM (1) 3-pin 3.5 mm detachable terminal block;Bidirectional RS-232 port;Passes RS-232 TD/RD data to/from the COM port on a DM Lite transmitter;Supports up to 115.2k baud HDMI OUT (1) HDMI Type A connector, female;HDMI digital video/audio output;DVI compatible4 DM LITE IN (1) 8‑pin RJ‑45 yellow connector, female, shielded;DM Lite input port for connection to a DM Lite output port of a DM Lite transmitter or DMPS Lite™ switcher1, 5 24V 0.75A (1) 2-pin 3.5 mm detachable terminal block;24VDC power input;Power pack sold separately, required only if the HD-RXC-4KZ-101-1G is used with a wall plate transmitter3 Ground (1) Chassis ground lug Controls and Indicators LINK (1) Green LED, indicates that a DM Lite link is established. PWR (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational. HDMI OUT (1) Green LED, indicates that the device is transmitting an HDMI signal DM LITE IN (2) LEDs on RJ‑45 connector.Green indicates that a DM Lite link is established.Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video. Power Power Pack Input: 100-240VACOutput: 24VDC 0.75AModel: PW-2407WUL (sold separately, required only if the HD-RXC-4KZ-101-1G is used with a wall plate transmitter)3 Environmental Temperature 32° to 104°F (0° to 40°C) Humidity 20% to 90% RH (non-condensing) Construction Composition Metal housing and bracket with black polycarbonate front label overlay Mounting Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included) Faceplate Requires a decorator style faceplate(FP-G series, sold separately) Dimensions Height 4.12 in. (105 mm) Width 1.72 in. (44 mm) Depth 2.19 in. (56 mm) Weight 5.4 oz (153 g)