QSC Dante network audio wall plate 4x2 mic/line I/O (Attero Tech) - unDX4I

The Attero Tech by QSC unDX4I is a cost-effective multi-IO Dante network audio I/O wall plate, featuring four balanced mic/line XLR inputs and two balanced line outputs on a Phoenix connector. Designed to fit into most dual gang US junction boxes, the unDX4I is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. The unDX4I’s size and I/O density make it easy to put Dante connectivity wherever it’s needed - near the audio source or sink - thereby eliminating costly and interference prone analog wiring. Features Dante Domain Manager ready Four balanced XLR mic/line inputs Two balanced line outputs on Phoenix depluggable connectors PoE powered Three software-adjustable input gains accommodate common line levels, phantom power and dynamic microphones. +48 V phantom power per channel Available Q-SYS control plugin - no programming required unDX4I Details:   Audio Inputs   Input types 4x XLR (balanced and RF filtered) Gain -18 dB, -3 dB, +25 dB and +40 dB, software selectable Maximum input level +20 dBu @ -18 dB gain,+6 dBu @ - 3 dB gain,-23 dBu @ +25 dB gain-38 dBu @ +40 dB gain Phantom power +48 V, software selectable Audio Outputs   Output type Two balanced line level with automatic muting on loss of Dante signal on 3-pin depluggable Phoenix Attenuation range Software controlled volume (0 to -60 dB, 1 dB increments) Maximum output levels +20 dBu at 0 dB attenuation Dante Network   Physical level Standard ethernet Connector Single RJ-45 Cable quality CAT-5e or higher Transmission speed 100 Mbps Supported sample rates 44.1 kHz, 48 kHz General   PoE 802.3af PoE PD compliant Dimensions (HWD) 4.2 x 3.5 x 2 in (114.3 x 88.9 x 50.8 mm)Decora wall plate (2-gang): 4.87 x 4.94 x 0.08 in (123.7 x 125.48 x 2.03 mm) Weight 0.6 lb (.27 kg)