Sublimatable Leather Glitter Rectangle Keychain

Sublimatable Rectangle Keychain Gloss White With Hardware  Supplies needed:- sublimatable substrate- sublimation transfer- Teflon or scratch paper- prepositional adhesive spray or heat tape- soft paper towel (recommended)Heat press settings:- temperature - 365 degrees F- dwell time - 2 minutes- pressure - heavy pressureNote: The recommended settings above may need adjustments for best results.Settings will vary depending on the heat press brand and model ink and paperand atmospheric conditions.2nd Note: The layers of soft paper towel achieve two goals: 1. it helps todistribute the pressure evenly throughout the substrate; 2. it helps to trapink that is dispersed outside of the edges of the substrate if there is anoverprint area or full bleed in the artwork.3rd Note: Use repositionable spray if sublimating the 2nd side of the tag.This will prevent tape marks on the first side.Layer the press from the bottom pad to the top heat platen as follows:1. Teflon sheet or scratch paper2. 2-3 layers of soft paper towel3. substrate4. transfer5. Teflon sheet or scratch paperSteps:1. Attach the substrate with heat tape or repositionable spray.2. Align the substrate onto the transfer.3. Place the transfer and substrate in the press onto the paper towel(transfer on top of substrate).4. Place the Teflon sheet or scratch paper on top of the heat pad.5. Press the items using the settings listed above.6. Remove items from the press immediately. Use heat resistant gloves ifnecessary - the items will be very hot.7. Tear the transfer in half opposite the taped ends.8. Place product under something heavy to prevent warping.9. Allow product to cool completely before sublimating second side.10. Any residue left behind from the adhesive spray can be cleaned off withlighter fluid or denatured alcohol.Tips:- If the image of the final product appears light increase the pressure orthe dwell time slightly (5-15 seconds).- If the image on the final product appears blurred or substrate appearsyellowed reduce the dwell time slightly (5-15 seconds).- When sublimating a double-sided substrate sublimate one side allow tocool and then sublimate the other side. Use a fresh Teflon or scratch paperunder the substrate to eliminate any degassing of the first image onto thepress or Teflon.