Sublimatable Coaster Burlap 4"x4" Square

Sublimatable Burlap has a simple, rustic look and takes sublimation ink beautifully. Available in many popular product designs, it allows full color personalization of products that previously could only be lasered. From picture frames, portfolios, and journals to keychains, passport holders and luggage tags, you now have many more options to offer customers! Note: The recommended settings above for sublimation may need adjustments forthe best results. Sublimation settings will vary depending on the heat pressbrand and model ink and paper and atmospheric conditions.2nd Note: The layers of no texture soft paper towel achieve two goals: 1. Ithelps to distribute the pressure evenly throughout the substrate; 2. It helpsto trap ink that is dispersed outside of the edges of the substrate if thereis an overprint area or full bleed in the artwork.Supplies needed:- sublimatable substrate- sublimation transfer- teflon or scratch paper- heat tape (H107)- soft paper towel (optional)Heat press settings:- temperature - 385 - 400 degrees F- dwell time - 1:00 - 1:15 minutes- pressure - Light/MediumSublimation:Layer the press from the bottom pad to the top heat platen as follows:1. teflon sheet or scratch paper2. 2-3 layers of soft paper towel (optional)3. substrate4. transfer5. teflon sheet or scratch paperSteps:1. Place down a couple layers of soft paper towel.2. Position the substrate onto the transfer and adhere transfer to substrateusing heat tape.3. Place the transfer and substrate into the press (transfer on top ofsubstrate).4. Place the teflon sheet or scratch paper over the transfer.5. Press the items using the sublimation settings listed above.6. Remove items from the press immediately. Use heat resistant gloves ifnecessary - the items will be very hot.7. Remove transfer from substrate.Tips:- If the image of the final product appears light increase the pressure orthe dwell time slightly (5-15 seconds).- If the image on the final product appears blurred or substrate appearsyellowed reduce the dwell time slightly (5-15 seconds).