New Cisco C9130AXI-B Wireless Access Point 9130AXI - Internal Antenna
New Sealed! Hardware only requires licensing Product Description Cisco Catalyst 9130AXI - wireless access point Device Type Wireless access point Form Factor External - indoor Localization United States RAM 2 GB Flash Memory 1 GB Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, 5 Gigabit Ethernet, 2.5 Gigabit Ethernet, IEEE 802.11ax (Wi-Fi 6) Frequency Band 2.4 GHz, 5 GHz Included Accessories Low profile bracket, ceiling grid clip Power Over Ethernet (PoE) Supported UPOE Dimensions (WxDxH) 8.9 in x 8.9 in x 1.9 in Weight 3.2 lbs General Device Type Wireless access point Ruggedized Design Indoor Width 8.9 in Depth 8.9 in Height 1.9 in Weight 3.2 lbs Localization United States Processor / Memory / Storage RAM 2 GB Flash Memory 1 GB Networking Form Factor External Connectivity Technology Wireless Line Coding Format OFDMA Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, 5 Gigabit Ethernet, 2.5 Gigabit Ethernet, IEEE 802.11ax (Wi-Fi 6) Spread Spectrum Method OFDMA Frequency Band 2.4 GHz, 5 GHz Status Indicators Status Features LLDP support, Maximum Ratio Combining (MRC), Wireless Intrusion Prevention System (WIPS), 802.1x authentication, cyclic shift diversity (CSD), MU-MIMO technology, packet aggregation A-MPDU, packet aggregation A-MSDU, Dynamic Frequency Selection (DFS), secure boot, 8x8 MU-MIMO technology, Target Wait Time (TWT), Cisco Trust Anchor module, 4x4 MIMO technology Encryption Algorithm AES, TLS, PEAP, TTLS, WPA2, EAP-SIM, WPA3, EAP-FAST Authentication Method MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM Compliant Standards IEEE 802.3, IEEE 802.3ab, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.15.4, IEEE 802.11ac, IEEE 802.3bz, IEEE 802.3bt, IEEE 802.11ax, Wi-Fi CERTIFIED 6 Antenna Antenna Internal Internet of Things (IoT) Internet of Things (IoT) Compatible Yes Communications Technology Bluetooth Low Energy (LE), Zigbee Expansion / Connectivity Interfaces 1 x 1/2.5/5GBase-T (UPOE) - RJ-451 x management - RJ-451 x USB 2.0 Miscellaneous Included Accessories Low profile bracket, ceiling grid clip Compliant Standards CISPR 24, EN 61000-3-2, ICES-003, EN 61000-3-3, EN55024, FCC Part 15.247, AS/NZS 60950-1, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, AS/NZS 4268, FCC Part 15.407, FCC CFR47 Part 15 C, FCC CFR47 Part 15 B, EN 62209-1, SRRC, EN 50385, EN 62209-2, EN 301 489-1, LP0002, RSS-247, KN32, KN35, AS/NZS CISPR 32 Class B, CISPR 32, EN 55032, EN 61000-6-1:2007, EN 60601-1-2:2015, CAN/CSA-C22.2 No. 60950-1, EN 300 328 V2.1.1, EN 55035, VCCI-CISPR 32:2016, CNS, EN 301 489-17, AS/NZS 2772, ARPANSA, KN 61000-3-2, KN 61000-3-3, KN 489-1, QCVN, KN 489-17, RSP-100, RSS-GEN, EN 301 893 V2.1.1 Power Power Over Ethernet (PoE) Supported UPOE Software / System Requirements Software Included CAPWAP Software Image Manufacturer Warranty Service & Support Limited warranty - lifetime Environmental Parameters Min Operating Temperature 32 °F Max Operating Temperature 122 °F Humidity Range Operating 10 - 90% (non-condensing)