Finsh 1 2 K HS Urethane Primer DTM High Build Prime FP415 QT FH416 1/2P

FP415 is a premium two-component primer surfacer DTM designed for high build and excellent filling of repairs. It provides excellent adhesion and gloss / color holdout. FP415 sands easily without clogging the sandpaper, while providing excellent resistance to sand scratch swelling. 1 Qt 1 FH4161/2p  FP415 is a two component, low VOC primer surfacer. This primer offers a high film build,    excellent gloss holdout, and excellent sanding characteristics. mix 4:1 with hardener FH415Q  And FH416 1/2P Made in the USA Substrates: For complete refinishing of larger bare metal areas, it is recommended to use an etch primer to ensure complete corrosion protection. Treated Aluminum Fiberglass/SMC OEM Finishes Refinish Lacquers, Enamels, and Urethanes Etching Primers Application: Adjust air pressure to: 30-40 psi for siphon feed gun, 20-30 psi for gravity feed gun, 30-40 psi for pressure feed gun with 5-10 psi pot pressure, 5-7 psi at the cap for HVLP gun Apply 2-3 medium coats, ata a gun distance of 5"-7", with 5-10 minutes flash time between coats Recommended dry film thickness after sanding is 2.0-2.5 mils. Maximum dry film thickness is 6 mils after sanding Clean spray gun with an appropriate gun cleaner, immediately after use Drying: Air Dry: 1.5-3 hours @ 70°F Force Dry: 30 minutes @ 140° Short Wave Infrared: 15 minutes on high setting @ 24" inches distance - Purge for 10 minutes before using short wave infrared To sand: 2 hours for air dry, and upon cool down for force dry and short wave infrared. Final Sanding: To seal - P400 To topcoat - P600 You will receive 1 QT of FP415 and 1 1/2P of FH416  Any questions please e-mail or call Cliffs Auto Parts at 1-800-287-6152 . 8 AM TO 6 PM  Monday - Friday  Saturday 9 AM TO 4 PM  Cliffs Auto Parts 4727 Conowingo RD Darlington MD 21034 . Shipping is in continental US