SIIG CE-DP0N11-S1 Triple 4K DisplayPort 1.4 to 2 DP & HDMI MST Hub Splitter
Vendor: SIIGSKU: 249348MPN: CE-DP0N11-S1Marketing InformationFeatures• Boost your productivity by connecting two DisplayPort and one HDMI displays to single DisplayPort output with Multi-Stream Transport (MST) technology• Provides multiple display modes for various applications such as Mirror mode* same content on each display, Extended mode with individual content on each display, and Panoramic Video Wall mode** which combines multiple monitors to use as one large displayNote: *Mirror mode using a NVIDIA Surround technology graphics adapter is limited to 2 displays. **Video Wall mode requires either a AMD Eyefinity, Intel, or NVIDIA Surround technology graphics adapter• Total Bandwidth 32.4Gbps (Max): Supports one UHD 8K (7680 x 4320)@30Hz display, two 4K@60Hz displays, or three 4K (3840x2160)@30Hz or less display. Other resolution combinations which are less than or equal to 4K@30Hz will work also. For example, three 2K, three 1080p, 4K+2K+1080p etc.*Note: The total combined bandwidth among all connected displays must NOT be exceeded the total bandwidth• Compatible with DisplayPort 1.4 with MST graphics cards with AMD Eyefinity, Intel Collage or NVIDIA Surround technology• Supports 4K HDR and HDCP 2.2• Reset button allows re-detection of all the displays if any of the displays are not detected• Plug-n-play, trouble-free set up without complicated hardware or driver installation• Premium aluminum housing with embedded woven braided DisplayPort cable decreases surrounding interference and provides optimal video qualityDetail SpecificationsChipset:VMM5320Maximum resolution:One screen 8K (7680 x 4320) at 30Hz and 7680x4320 at 60Hz YUV 4:2:0 with DSC (Display Stream Compression)Two screen 4K at 60Hz / 5120x2880 at 60Hz (DSC)Three screen 4K at 30Hz / 3840x2160 60Hz (DSC)Compliant with DisplayPort 1.4 specificationsDisplay Modes:Mirror, Extend, Panoramic video wall-Note: AMD Eyefinity or NVIDIA Surround technology graphics adapter is required to support Panoramic Video Wall modeTotal Bandwidth 32.4Gbps:Supports one UHD 8K (7680 x 4320) at 30Hz display, two 4K at 60Hz displays, one 4K at 60Hz display with two 4K at 30Hz displays, three 4K at 30Hz displays. Other resolution combinations which are less than or equal to 4K at 30Hz will work also. For example, three 2K, three 1080p, 4K+2K+1080p etc. -Note: The total combined bandwidth among all connected displays must NOT be exceededProduct:Color:BlackHousing:aluminumConnector:1x 20-pin, DisplayPort, Male, Input2x 20-pin, DisplayPort, Female, Output1x HDMI, Type-A, Female, Output1x 5-pin, Micro USB, Female, Input (for power only)1x Reset buttonEnvironmental conditions:Operating temperature:32 to 104 degrees FStorage temperature:-4 to 158 degrees FRelative humidity:5% to 90% RH (non-condensing)Certifications/Standards:FCC, CE, RoHSSystem RequirementsDesktop or laptop with an available DisplayPort 1.4 Dual mode outputAMD Eyefinity or NVIDIA Surround technology graphics adapter is required to support Panoramic Video Wall modeRequires GPU / graphics card to support at least 3 external displays to use all 3 video outputs at the same timeRequires USB 3.0 power source of at least 5V/600mANote:macOS is not supported. macOS currently does not support MST function and will only mirror the displaysWarranty Information2 Years - Direct from the Manufacturer..ja..