2X VANT 3S 11.1V 5200mAh 50C Lipo Battery Pack w EC5 ARRMA POWERHOBBY LECTRON

2 PACK LISTING  Compatible With: Virtually all 1/10 Scale Vehicles. Most batteries are about 25mm in height.*Note that due to the ~26mm height of the battery, an extended battery strap may be needed for some vehicles.  Stampede VXL requires about 1-2mm of Washers/Spacers installed under the ESC Tray to allow room for the ~26mm battery height. 1/8 Scale Vehicles that accept up to 6S LiPo batteries. Run 2 of these batteries in series to achieve 6S power! Please check with your Speed Control's manual to determine if it can accept 11.1V batteries. Use the size specifications below to determine if this battery will fit your application. Capacity: 5200mAhVoltage: 3S / 3 Cell / 11.1vDischarge Rate: 50C Constant (260A) / 100C Burst (10 sec) (520A)Charge Rate: 2C (10.0A)Watt Hours: 55.50WhWeight: 11.6 oz / 329.0g (including wire, plug & casing)Dimensions LxWxH: 135.5 x 43.5 x 26.0 mmDimensions w/ Wires folded at end of pack: 139.5 x 43.5 x 26.0 mm*Note that dimensions may vary by ± ~1mm.Discharge Plug: EC5 Connector Plug (IC5 Compatible)Balance Plug: JST-XH