iDatalink HRN-HRR-FO1 + ADS-MRR2 Retain the factory steering wheel audio controls and amp with a new car stereo for select 2006-2016 Ford, Lincoln, Mercury, and Mazda vehicles

      iDatalink HRN-HRR-FO1 + ADS-MRR2 Retain the factory steering wheel audio controls and amp with a new car stereo for select 2006-2016 Ford, Lincoln, Mercury, and Mazda vehicles       DETAILS  iDatalink Maestro HRN-HRR-FO1 Plug and Play T-Harness for select Ford Vehicles    RR and RR2 compatible radio replacement harness for select Ford, Lincoln, Mazda and Mercury vehicles 2006-2016. The radio side of the harness terminates in a universal connector that can be used in conjunction with available Maestro Head unit adapters for a plug n play solution or removed for conventional connections Please see vehicle fit guide for more information on this solution.   Features:   Allows installation of a new receiver with iDatalink port in select Chrysler-made vehicles (also requires the Maestro ADS-MRR or ADS-MRR2 module) Retains the use of your steering wheel audio controls and factory amp Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood, Pioneer, and Sony receivers Vehicle Application:    Ford    Econoline/ E Series: 2008 - 2013 Edge: 2007 - 2010 Escape: 2008 - 2012 Expedition: 2007 - 2014 Explorer: 2006 - 2010 Explorer Sport Trac: 2006 - 2010 F-150 (With Factory Navigation): 2009 - 2012 F-150 (Without Factory Navigation): 2009 - 2012 F-150 (w/o"My Ford", w/o "My Ford Touch"): 2013 - 2014 F-250 (Without 8" Screen): 2013 - 2016 F-350 (Without 8" Screen): 2013 - 2016 F-450 Without 8" Screen: 2013 - 2016 F-Series Super Duty: 2008 - 2012 Flex (With Factory Navigation): 2009 - 2012 Flex (Without Factory Navigation): 2009 - 2012 Focus: 2008 - 2011 Fusion (With Factory Navigation): 2006 - 2012 Fusion (Without Factory Navigation): 2006 - 2012 Mustang: 2007 - 2009 Mustang (With Factory Navigation): 2010 - 2014 Mustang (Without Factory Navigation): 2010 - 2014 Taurus: 2008 - 2012 Taurus Limited: 2010 - 2012 Taurus X: 2008 - 2009 Lincoln    MKS: 2009 - 2012 MKT: 2010 - 2012 MKX: 2007 - 2010 MKZ: 2006 - 2009 / 2011 Mark LT (With Factory Navigation): 2010 - 2011 Navigator: 2008 - 2014 Zephyr: 2006 Mazda   Tribute: 2007 - 2011 Mercury    Mariner: 2008 - 2010 Milan: 2006 - 2011 Mountaineer: 2006 - 2010 Sable: 2008 - 2009   What's in the box:     Ford installation harness OBDII harness (pre-connected to main harness) Sub harness Camera harness 2 Yellow/Black wire harnesses             iDatalink Maestro RR2 Interface Module Connect a new stereo and retain the steering wheel audio controls and other factory features in select 2006-up vehicles     Keep your vehicle's features iDatalink's Maestro ADS-MRR2 module, along with the correct interface harness for your vehicle, allows you to install a new car stereo in select late-model Chrysler, Fiat, Ford, General Motors, Honda/Acura, Subaru, Toyota/Scion, and Volkswagen vehicles while retaining your steering wheel audio controls and other factory conveniences you've grown accustomed to. And setup only takes a few minutes via Bluetooth from your smartphone or other device, a big improvement over previous models. You'll also need an additional Maestro vehicle-specific wiring harness that connects your new receiver to the ADS-MRR2 module and your vehicle's wiring. When you purchase a new car stereo, we will automatically offer this harness along with the ADS-MRR2 module at a discounted price on your way to the Cart.   Here's how it works First, you connect the Maestro to your computer using the included USB cable or to your smartphone or other device via Bluetooth, visit www.idatalink.com/maestro, and follow the instructions. Once the unit has been "flashed," it's ready to go.    Retains steering wheel audio controls The ADS-MRR2 module also allows you to use your factory steering wheel audio controls with your new receiver. Using the intuitive web programming interface, each factory button can be assigned a specific radio function. Better yet, you can also assign a secondary "press and hold" radio function to each factory button, effectively doubling what can be controlled. It's simple to update the module's firmware and software via a wireless Bluetooth connection.   Command center  The ADS-MRR2 features three programmable outputs which allow you to control relay-driven aftermarket accessories from an iDatalink Serial Port-compatible Kenwood, JVC, Alpine, Sony, or Pioneer in-dash receiver. These outputs can be individually configured to Latch, Toggle, Follow a CAN signal in the car (firmware dependent), or have a custom output configuration, as well as setting Delay On and Delay Off times for each output. You can also assign a steering wheel control button from the vehicle to control one of these outputs. The ADS-MRR2 also features a dedicated port for radar detector integration that allows you to connect to select Escort radar detectors (sold separately).    Keeping your factory features with an iDatalink-compatible car stereo If you're buying a compatible Kenwood, JVC, Pioneer, Sony, or Alpine receiver, you'll enjoy the outstanding performance of your receiver, plus seamless touchscreen control over most of the factory features in select vehicles (see Details for specific functions and installation notes). You'll also see a list of these features on the way to the Cart with the car stereo you've selected.   With most iDatalink-compatible car stereos, you'll also be able to add additional features like performance gauges, climate controls, and parking assistance that appear on your new receiver's touchscreen.     Product highlights: allows installation of a new car stereo in select 2006-up vehicles built by Chrysler, Fiat, Ford, GM, Honda/Acura, Subaru, Toyota/Scion, and Volkswagen works with required vehicle-specific harness (sold separately) to retain factory steering wheel audio controls, retain the factory amp if present, and integrate all car stereo connections retains factory convenience features (OnStar, SYNC, Uconnect, and more) with select Kenwood, Alpine, Pioneer, Sony, and JVC touchscreen receivers displays engine performance data on touchscreen with select Kenwood, JVC, Pioneer, Sony, and Alpine multimedia receivers setup via Bluetooth-enabled device or mini-USB-to-USB-A cable three programmable outputs control relay-driven aftermarket accessories dedicated port connects to select Escort radar detectors (sold separately) dimensions: 4-3/4"W x 3/4"H x 3-1/4"D warranty: 1 year   MFR # ADS-MRR2   What's in the box:   Radio replacement interface module 18" Interface harness (4-pin to 4-pin) 18" SWC harness (4-pin to 3.5mm/bare-wire) 22" Audio harness (3-Pin to 3.5mm) 8" Programmable output harness (6-pin to bare-wires) 8" Radar harness (6-pin to bare-wires) 7" USB-C to USB-A cable