CRL Sprinter Windows 170"/144" Driver's Side Forward T-Vent (FW621L)

Looking for Sprinter van windows for your Sprinter camper van? This screened, vented camper window not only matches the style and tint of the factory glass, it also fits the factory window cutouts, eliminating the time-consuming efforts of laying out where the window will be installed. The large fixed windowpane at the top gives you plenty of light and views, while the crank-out opening panels at the bottom provide great ventilation. Key Features: CRL Sprinter Windows 170"/144" Driver's Side Forward T-Vent (FW621L) This Driver's Side Forward T-Vent (FW621L) window: Fits 2007+ Mercedes Sprinter 144" and 170"WB models Has 28% dark gray factory tint Has two crank-out, opening bottom panels with detachable screens Has a clamp (trim) ring, so does not require adhesive, primer or sealant Uses tempered glass for maximum safety and strength Is tested to ANSI Z26.1 and FMVSS 205 safety standards Uses factory stampings for cut lines Proudly made in the USA by CR Laurence. Note: This window does not fit a driver-side sliding door.  When mounting these windows in your Mercedes Sprinter van: If you can, cut the openings with a center-blade shear, rather than a jigsaw - this will cut an opening that may be less ragged, produce less debris, and produce less hammering on the sheet metal of the van. Make sure you paint the cut edges of the new window opening - if you skip this step, moisture can rust out the edges of the window mounting. IMPORTANT: these windows clamp in place - ensure you do not use power tools on the inner trim ring screws, use hand tools to tighten these. Specifications: CRL Sprinter Windows 170"/144" Driver's Side Forward T-Vent (FW621L) Height (in.): 30 Width (in.): 54 Weight (lbs.): 35 Tint: 28% Dark Gray Window Type: Dual-Vent (Clamp-in)