Ubiquiti UniFi LTE Backup Pro U-LTE-Backup Pro
The Ubiquiti UniFi LTE Backup Pro U-LTE-Backup Pro is a seamless internet failover for UniFi gateways. Bring your own AT&T nano-SIM for LTE data. Requires a UniFi Cloud Gateway or UniFi Gateway Bring your own AT&T nano-SIM for LTE data* Flexible mounting (1) GbE PoE port** Powered using PoE RP-SMA connector for optional external antenna 1.54" status display *Works with the AT&T network. **PoE+ required for PoE passthrough. Technical Specifications Mechanical Dimensions 66 x 202 x 32 mm (2.6 x 8 x 1.3") Weight Without stand: 223 g (7.9 oz)With stand: 336 g (11.9 oz) Enclosure material Polycarbonate Mount material Stand: aluminiumWall mount: polycarbonate Hardware Processor 74 Kc MIPS processor at 775 MHz Memory 128 MB DDR2 Networking interface (2) GbE RJ45 portsLTE Category 4 radio Management interface Ethernet PoE interface (1) PoE in (PoE output not used)(1) PoE passthrough output (Requires a PoE+ switch) SIM nano-SIM**Data-only. LTE bands Band 2, 4, 5, 12, 14, 66 Operator AT&T network*US only. Power supply UniFi PoE switch48V, 0.5A PoE adapter Supported voltage range 44—57V DC Max. power consumption Excluding PoE passthrough output: 8.5W Max. PoE passthrough wattage per port 15.4W**Requires a PoE+ switch MIMO 2 x 2 LTE Category 4 Throughput speeds* Download 150 Mbps / Upload 50 Mbps* Speed and coverage depend on location and network performance. Antenna (2) Internal LTE antennas(1) Female RP-SMA connector for an external antenna (optional)**The maximum antenna gain must not exceed 6 dBi to comply with regulation. External antenna port* Female RP-SMA connector*Please use male RP-SMA antennas to match the U LTE Backup Pro. LCM display 1.54" screen Button Factory reset Mounting Wall mount or foot stand (Included) Ambient operating temperature -10 to 60° C (-14 to 140° F) Ambient operating humidity 5 to 95% noncondensing Certifications FCC, IC Software Management application UniFi Network: Version 7.2.85 and later