Massive Car Audio 4 Ch Amplifier Class A/B 800W Blade Series BP800.4 V2

Massive Audio Blade Series BP800.4 4 Channel 800 Watts 2 Ohm Stable Amplifier The BLADE BP Series Amplifiers are designed with our "Live, Loud and Play Hard" motto. All amplifiers have built-in OEM line converters with RCA inputs that can take a high-level speaker signal at up to 9 Volts directly in. By sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and convert the 12V turn on into a 12V switched out. Blade "BP" is Class AB designed with a minimum per channel impedance operation of 2 Ohm. This Listing Includes: (1) BP800.4Amplifier (4) Philips Head Screws (4) Washers (1) Owner's Manual Features: - Built-In OEM Line Converter - 2 Ohm Stable Design - Low Pass Frequency / OFF Crossovers - Up to 9 Volt Input via RCA or High-Level Speaker Leads - Bass Boost 0dB ~ 12dB @ 45Hz - Built-in Noise Reduction Circuitry - Full MOSFET with High-Grade Switching Devices - Built-In, DC Offset, Auto Sensing Turn On Function (Hi-Level Inputs) - 12V Remote Output for External Devices (Hi-Level Inputs) - Variable Low Pass Crossover Frequencies from 50Hz ~ 750Hz - Ground Loop Isolator - Next-Generation Advanced 5 Way Protection Circuitry - High Output Power Supply & Dual Output Voltage - Mil-Spec PCB with SMD parts Specifications: Peak Output Power @ 14.4V: 200Wx 4 1 Ohm RMS: N/A 2 Ohm RMS: 120Wx 4 4 Ohm RMS: 60W x 4 4 Ohm Bridged: 240W x 2 Input Level: 0.2~9.0v Freq. Response: 10Hz~35KHz THD at 4 Ohm Load 30% Rated Power: Less Than 0.05% S/N Ratio: More Than 90dB BassBoost: 0~6DB/12dB (45Hz) Minimum Load: 2 Ohm Stereo Weight(Lbs) 7.45 Lbs Dimensions: 2"H x 7.1"W x 11.8"L