Adapter #128 50A 240v 3.5ft. cable NEMA 14-50 to two duplex outlets, accepts 6-15 and 6-20 plugs

This adapter allows you to plug into your 4-prong NEMA 14-50 Outlet and gives you two 20 amp 240 volt Duplex Outlets, they will accept both NEMA 6-15 and 6-20 plugs.  This adapter is internally wired to maximize the current path to each outlet giving each duplex Outlet access to the total budget of 50amps from the power input cord. You draw up to 20amps out of each duplex Outlet, but not all four at the same time as this would exceed the 50amp total limit. This means you can draw 20amps out of one Outlet of the duplex and then a total of 30 amps amongst the remaining three outlets or 12.5amps out of each of the four outlets, or any combination that adds up to 50amps. Between the four outlets you have access to all 12000 watts from the power input cord. Following the NEC codes 80% rule of thumb it states any continuous load should not be more than 80% of the rated capacity for maximum capacity. The NEC code's definition of a continuous load is one that runs for more than 3 hours so thi