Sublimation Face Mask w/Black Trim
Sublimation Face Mask w/Black Trim. Sublimation blanks only not customized. Heat press settings:Temp-385 FTime- 50 sec to 1 min.Pressure- Medium to Firm Note: The recommended settings above for sublimation may need adjustments for best results. Sublimation settings will vary depending on the heat press brand and model ink and paper and atmospheric conditions. Steps:1. Use a lint-roller to remove any loose debris from the substrate if necessary. Prepress mask for about 5sec.2. Position the substrate onto the transfer and adhere transfer to substrate using heat tape.3. Place the transfer and substrate in the press onto the paper towel or butcher paper (transfer on top of substrate).4. Place the teflon sheet or scratch paper over the transfer.5. Press the items using the sublimation settings listed above.6. Remove items from the press immediately. Use heat resistant gloves ifnecessary - the items will be very hot.7. Remove transfer from substrate