Across International Ai -15C 3L Compact Recirculating Chiller With Centrifugal Pump
Ai C15 series recirculating chillers are the true thermostatic control laboratory chiller, this closed laboratory chiller is ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications. Ai C15 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature. IMPORTANT! -15C/5F ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED). Features ETL tested to UL and CSA standards No dry ice or liquid nitrogen needed 360 degree rotating chilling fluid connectors ANSI standard all stainless steel reservoir All steel construction for durability Small footprint saves valuable lab space Cost saving as the water consumption is completely eliminated Eco-friendly R404A refrigerant Insulated tubing included Recommended for 2L rotary evaporators Attention! Do NOT use Ai Chill-50 heat transfer fluid with this unit. Vacuum oven specifications Electrical requirements 220V +/-10% 50/60Hz 1-PH 21A, 4,600 watts Chamber Size: 22 x 23.5 x 25" Material: Stainless steel Capacity: 7.5 cubic feet Heater 5-sided heating (left 900W, right 900W, top 900W, bottom 900W, back 250W x 4) Temperature control Controller: low proportional gain, microcomputer PID controlled with LCD display Range: ambient to 250°C (480°F) Display units: Fahrenheit or Celsius Uniformity: +/- 7% of setpoint Dwelling timer range: 1 to 9999 minutes Warm-up time to 100°F: 45 minutes Warm-up time to 480°F: 2 hours 15 minutes Vacuum Ultimate vacuum level: better than 500 microns/millitorrs (may vary based on your altitude, click here to learn more) Mechanical gauge range: 0 to 30 inch mercury Vacuum port: KF25 flange x 1 Vent port: KF25 flange x 1 Vacuum pump: Sold separately Weight Unit: 450 Lbs, shipping: 680 Lbs Dimensions (WxDxH) Unit: 37 x 35.5 x 38" Shipping: 42 x 40 x 43" Shelves Shelf size: 21.75 x 23 x 0.5" (WxDxH) Material: aluminum Style: pan-shape Capacity: 18 shelves max. Comes standard with oven purchase: 9 shelves Total area with 18 shelves: 61.8 sq ft or 8901 sq inch Distance between the most adjacent shelves: 1.25 inches Door gasket material Silicone or Viton Observation window 1/2" tempered safety glass Safety Built-in circuit breaker Overheat shutoff protection Secondary over-temp protection dial In-door lights White LED (pre-installed) Compliance ETL tested to UL and CSA standards Warranty 2 years