10" 250W RMS 4-Ohm SVC Subwoofer Kicker CompC Series / 50CWCS104
10" 250W RMS 4-Ohm SVC Subwoofer Kicker CompC Series / 50CWCS104 This Listing Includes: (1) 50CWCS104 Subwoofer Description: The 10" 250W RMS 4-Ohm SVC Subwoofer Kicker CompC Series / 50CWCS104 delivers powerful bass and exceptional sound quality, making it a must-have for any car audio enthusiast. With its robust construction and high-performance capabilities, this subwoofer is designed to provide deep, resonant lows that elevate your music experience. The CompC Series is known for its durability and reliability, ensuring long-lasting performance even under heavy use. This subwoofer's compact design allows for easy installation in a variety of vehicles, making it a versatile choice for any car audio setup. Upgrade your sound system with the Kicker CompC Series subwoofer and enjoy an unparalleled listening experience. Download Owner's Manual Features: Single Four-Ohm Voice Coil and Reengineered for Increased Excursion and Deeper Bass Injection-Molded Polypropylene Cone Forced-Air Cooling™ for Outstanding Durability Ribbed Polyurethane Surround Signature Yellow Surround Stitching High-Strength Spiralead™ Tinsel Leads Stamped Steel Basket High Temp Voice Coil Spring-Loaded Speaker Terminals Specifications: Size [in, cm]: 10, 25 Recommended Amplifier Power [watts RMS]: 125-250 Peak Power Handling [watts, per ANSI/CTA-2031-A]: 500 Sensitivity [dB 1w/1m]: 85.9 Rated Impedance [OHMS]: 4 SVC Fs [Hz]: 33.9 Frequency Response [Hz]: 30-500 Thiele & Small Parameters: Electrical Parameters Re: 3.775 | Ohm | electrical voice coil resistance at DC Krm: 0.0031 | Ohm | WRIGHT inductance mode Erm: 0.93 | WRIGHT inductance mode Kxm: 0.02235 | Ohm | WRIGHT inductance mode Exm: 0.78 | WRIGHT inductance mode Cmes: 867.8 | µF | electrical capacitance representing moving mass Lces: 30.625 | mH | electrical inductance representing driver compliance Res: 48.48 | Ohm | resistance due to mechanical losses fs: 30.95 | Hz | driver resonance frequency Mechanical Parameters Mms: 96.9255 | g | mechanical mass of driver diaphragm assembly including air load and voice coil Mmd(Sd): 89.217 | g | mechanical mass of voice coil and diaphragm without air load Rms: 2.305 | kg/s | mechanical resistance of total-driver losses Cms: 0.274 | mm/N | mechanical compliance of driver suspension Kms: 3.66 | N/mm | mechanical stiffness of driver suspension Bl: 10.5685| Tm | force factor (Bl product) Loss Parameters Qtp: 0.6495 | total Q-factor considering all losses Qms: 8.1655 | mechanical Q-factor of driver in free air considering Rms only Qes: 0.6365 | electrical Q-factor of driver in free air considering Re only Qts: 0.59 | total Q-factor considering Re and Rms only Other Parameters Vas: 15.1976 | I | equivalent air volume of suspension n0: 0.2235 | reference efficiency (2 pi-radiation using Re) Lm: 85.69 | dB | characteristic sound pressure level (SPL at 1m for 1W @ Re) Lnom: 85.945 | dB | nominal sensitivity (SPL at 1m for 1W @ Zn) Sd: 359.68 | sq cm | diaphragm area Xmax: 13.15 | mm Measurement: Outer Frame Dimension [in, cm]: 10-11/16, 27.2 Mounting Depth [in, cm]: 5-3/16, 13.2 Mounting Cutout [in, cm]: 9-3/16, 23.3 Enclosure Suggestions: Max Rec Sealed Box Vol [cu. ft, liters: 2.4, 68 Min Rec Sealed Box Vol [cu. ft, liters: 1, 28.3 Max Rec Vented Box Vol [cu. ft, liters): 1.75, 49.6 Min Rec Vented Box Vol [cu. ft, liters]: 1.25, 35.4