
BARNOLIX Swing Ride DIY Music Box 3D Wooden Puzzle EA02
Robotime-ROKR Swing Ride DIY music box is a creative and fun-to-play wooden 3D puzzle kit of Magic Amusement Park Series. Its design is inspired by the swing ride in the amusement park. With built-in movement, the seats will be suspended from the rotating top of the carousel with music and lights on by simply touching the button. Build this exquisite 3D wooden puzzle with your hands and enjoy the ride! The item is retro ceiling shape, valance and lamp belt surround the cornice together, the atmosphere creates a romantic and warm flavor and adds a lingering classical charm. The six sides of the central pillar are made of mirror material. It is like a mysterious magic mirror when the lights come on, reflecting the romance of paradise and increasing the overall layering. *Note: Due to customs policy wax may not be included in packages. Translucent side windows with hollow structure and warm light flashes Cutout design flying chairs in red and white, small and exquisite Touch switch, hidden design, convenient and quick var productFaqs = {"productFaqs": [ {"items": [{"question":"What is the music?","answer":"It's 'MERRY GO AROUND'.","image":""},{"question":"Battery Box Terminal Insertation Diagram","answer":"As shown","image":"https://cdn.shoplazza.com/a69cc15a3013519f18bafa8b9b713bd4.jpg"},{"question":"One bead on the Light strip P18 is always on and cannot be turned off.","answer":"At Q5, Short circuit of copper foil at the electrode of the triode causes the running lamp to stay on.Solution : After-sale Maintenance.","image":""},{"question":"Assemble top lights in the right way, but it still cannot work.","answer":"At the connection of the constant light strip, the wire lamp is too long, leading to a large bending short circuit and the light does not light up.Solution: At the connection of the constant light strip and wire lamp, separate the two wires to avoid connecting.","image":""},{"question":"Stuck Rotation","answer":"All functions are normal. But when rotating, it gets a little stuck, and it looks like a cycle.Solutions:1.Keep rotating for ten minutes more to observe if it gets more fluently.2. Disassemble the base as the instructions to apply wax or oil the place for adequate lubrication.3. Observe whether the E4 parts are assembled, and whether the four securing screws are tightened to the end.4.From the side, observe if A11 is pressed to the end and if A11 is inserted closely with related parts.Solutions:1.Wax the bottom planetary gear and the outside big gear. If it is difficult to disassemble, turn it for a while, and it will generally become easier.2.Grease the round circuit board above the thimble.","image":"https://cdn.shoplazza.com/2b9ac21e021ce642de5a06b7501649c8.jpg"},{"question":"The constant light strip on the canopy is flickering during rotation.","answer":"When rotating, due to the poor contact between the spring thimble P17 and round circuit board, the light strip will be flickering.Solutions:1.Disassemble the base to check if the E4 parts are assembled, and if the four securing screws of P4 are tightened to the end.2.Check if the surface of spring thimble with the round circuit board is greased.3.Check if the blue and black wires have been installed in the wrong holes.4.Check if the five terminals of the battery box are loose or incorrectly inserted.","image":"https://cdn.shoplazza.com/bc80bc3c8de3231c3de718b0cff2e535.jpg"},{"question":"The lights work but the motor cannot run.","answer":"All lights work and the loudspeaker can make a sound, but the motor cannot run.Reasons:1.Excessive internal friction2.Internal parts stuck gears or main shafts.3.The outer flying chair hitch on the central pillar assembly.4.The circuit is powered off due to blocking.5.How long did it keep on rotating? If it lasts more than 5 hours, the battery may not be able to support the motor. If it still doesn’t work after replacing batteries, then the circuit board or motor is probably broken.Solutions:1. Gently rotate the middle pillar to check the rotation. If it’s difficult, disassemble the base to wax or grease corresponding positions as shown in the instruction book.2. Gently rotate the middle pillar to check the rotation. If it’s difficult to rotate, it’s probably stuck inside. Please disassemble firstly and reassemble it as the instructions.3.Check if the outer flying chair hitch on the middle pillar.4.Rotate the middle pillar gently. If it cannot be rotated, please restart it. Generally, getting stuck results from the chair hitched on the middle pillar, and in this situation, the motor current will be too large and the circuit board will start self-protection to prevent burning circuit.5. Check if the terminal No.4 of the battery box is loose or incorrectly inserted.","image":"https://cdn.shoplazza.com/08b2a9682080fed788999c051c6fa4cd.jpg"},{"question":"Touch switch failure","answer":"Touch the “ROKR” logo for several times, but the flying chairs do not move.Reasons:1. Forget to load batteries.2.Check the positive and negative electrodes.3.Check if the metal touch sheet is disconnected with the green wire.4.Check if the terminal No.1 of the battery box is loose or incorrectly inserted.","image":"https://cdn.shoplazza.com/e090d427c5751fac2e584e97769ee29b.png"},{"question":"The loudspeaker cannot make a sound","answer":"Touch “ROKR” logo, and the flying chairs can rotate with lighting up, but it cannot play on music.Reasons: 1.Check if the wire of the loudspeaker is broken.2.Check if the terminal No.2 of the battery box is loose or incorrectly inserted.3.Check the wiring. If it’s right, check if the terminal of the loudspeaker is incorrectly inserted. If both are right, return the battery box and the loudspeaker for replacement.","image":"https://cdn.shoplazza.com/67fbca20539310f60cfb813ec7ec06ac.png"}, ] } ] };