Lectrosonics DSQD/AES3 Digital 4 Channel Receiver with AES Digital Outputs
avlgear.com

Lectrosonics DSQD/AES3 Digital 4 Channel Receiver with AES Digital Outputs

$5,959.00
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

AVLGEAR

View Store

Lectrosonics DSQD/AES3 Digital 4 Channel Receiver with AES Digital Outputs The DSQD Half Rack Receiver with analog and digital audio outputs utilizes the Lectrosonics signature digital architecture with remarkable audio quality and ultra-low latency. The receiver includes an extended operating range rivaling the best analog and Digital Hybrid Wireless® systems with continuously tunable tracking filters covering 470.100 - 614.375 MHz. Antenna ports on the rear panel accept input from remote antennas, with a “loop-thru” output to another mainframe using the internal multicoupler. A kit is also available to mount antenna inputs (BNC connectors) on the front panel. Key Features Four-channel, half-rack design Continuously tunable tracking filters covering 470.100 - 614.375 MHz Compatible with stereo and mono digital transmitters, and Digital Hybrid Wireless® transmitters. Built-in wideband antenna multicoupler with loop-thru for additional receivers Antenna bias power enabled from the front panel (fused and over-temperature protected) IR bi-directional port for transmitter setup Analog and Digital audio outputs with TalkBack (in applicable RX modes) Ethernet and USB interface Technical Specifications Operating Spectrum 470.100 - 614.375 MHz Frequency Adjustment Range 25 kHz steps Sampling Size and Rate 24-bit, 48 kHz Digital Modulation 8PSK with Forward Error Correction Data Encoding Proprietary ADPCM Encryption AES 256-CTR (per FIPS 197 and FIPS 140-2) System Latency Digital Output D2 mode 1.4 ms plus Dante Duet mode 1.4 ms plus Dante Hybrid modes 2.0 ms plus Dante Analog Output D2 mode 1.9 ms Duet mode 1.9 ms Hybrid modes 2.5 ms Frequency Response 20 Hz - 20 KHz, +-1 dB THD+N 0.05% (1 KHz @ -10 dBFS) Dynamic Range 108 dB A-wtd, NR=NORMAL Adjacent Channel Isolation >85 dB Diversity Technique Noiseless antenna switching Sensitivity -98 dBm for 10-5 BER Antenna Inputs/Outputs Dual BNC female, 50 ohm impedance Audio Outputs XLR Balanced, -35 to +8 dBu Headphone 1/8 inch phone jack Dante model only RJ45 Gigabit Ethernet AES3 model only TA3M External DC Power 7 to 18 VDC; 2.5A (max) Weight 1.95 lbs.; 880 grams Dimensions 8.375 x 1.75 x 7.375 in. 213 x 44.5 x 187 mm. Origin Designed and manufactured in the USA Included Accessories 1-USB cable (#21926) 1-Bracket, rear tie (#25990) 1-Bracket, front tie (#25991) 1-Rack flange bracket (#27076) 1-Rack “D” handle (#27082) 1-SCR10 cap screw (#28885) 1-Spacer (#28951) 1-Rubber feet, large, stick on (#35664) 1-Hex key (#35800) 1-Hole plug (#35959) 1-right angle BNC antenna, block 20 (#A500RA20) 1-right angle BNC antenna, block 22 (#A500RA22) 1-power supply (#DCR15/4AU)

Show More Show Less