BSS BLU-102 Conferencing Processor with AEC Telephone Hybrid

BSS BLU-102 Conferencing Processor with AEC Telephone Hybrid The Soundweb London BLU-102 offers a fixed configuration of 10 analog inputs and 8 analog outputs, an analog telephone interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus. The RJ-11 port enables the BLU-102 to interface with a standard POTS (aka PSTN or Analog PBX) telephone network. The BLU-102 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The BLU-102 contains dedicated AEC processing for up to 8 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 8 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device. The BLU-102 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices. The BLU-102 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution. Key Features 10 Analog Inputs (with 48v Phantom Power per Channel) 8 Analog Outputs RJ-11 Telephone Input/Output Port Configurable Signal Processing 8 Channels of AEC Processing with Auto Gain Control and Noise Cancellation Rich Palette of Processing and Logic Objects 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus Clear Front Panel LED Indication Bi-Directional Locate Functionality 12 Control Inputs and 6 Logic Outputs for GPIO Integration Soundweb London Interface Kit for Third Party Control System Integration (Documentation) HiQnet Device Configuration, Control and Monitoring from HiQnet London Architect Technical Specifications Front Panel Led Indicators: Per Input: Signal Present, CLIP, 48V (Input only) Other: COM, STAT, ERR, PWR Analog Inputs: 10 electronically balanced on Phoenix Combicon removable screw connectors Mic/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps Input Impedance: 3.0kΩ Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain CMRR: >75dB at 1KHz Input Noise (E.I.N.): <-125dBu typical with 150Ω source Phantom Power: 48V nominal, selectable per input A/D Latency: 37/Fs <0.77ms@48k> Analog Outputs: 8 electronically balanced on Phoenix/Combicon removable screw connectors Maximum Output Level: +19dBu Frequency Response: 20Hz-20KHz (+0.5dB/-1dB) THD: <0.01% 20Hz to 20KHz, +10dBu output Dynamic Range: 108dB typical, 22Hz-22KHz unweighted Crosstalk: <-75dB Output Impedance: 40Ω balanced and 20Ω unbalanced D/A Latency: 29/Fs <0.60ms@48k> BLU link: Connectors: 2 x RJ45 Ethernet connectors Maximum Cable Length: 100m/300ft on Category 5e cable between devices Max. Number of Nodes: 60 Latency: 11/Fs <0.23ms@48k> Pass Through Latency: 4/Fs <0.08ms@48k> Power and Dimensions: Mains Voltage: 100-240V AC, 50/60Hz Power Consumption: <55VA BTU Rating: <188 BTU/hr Operating Temp. Range: 15 (59) to 35 (95) degrees C (degrees F) Dims: (H(U) x W x D): 1.75” (45mm)(1U) x 19” (483mm) x 12.5” (318mm) Weight: 9.1 lbs / 4.1 kg