Autel XP400 Key / MCU EEPROM Chip Programmer Work with Autel MaxiIM IM608/IM508
Autel XP400 Key and Chip Programmer Work with Autel MaxiIM IM608/IM508Autel XP400 KEY & CHIP PROGRAMMER Function List:Support PCMCU / EEPROM Chips Read / WriteECU Read / WriteMC9S12 Encryption Chip Read / WriteKey Read / WriteMercedes Infrared Key Read / WriteRemote Frequency DetectIC Card Read/WriteAutel XP400 KEY & CHIP PROGRAMMER Introduction:Connect the IM608 tablet to the XP400 Key Programmer (no vehicle connection required) to access the key chip, read, retrieve and write key information, as well as other key related functions. The XP400 includes 12 ports:1. DC Port – provides 12V DC power supply.2. USB Port – provides data communication and 5V DC power supply.3. DB 26-Pin Port – connects with the Mercedes Benz infrared cable, vehicle key cable, ECU cable, MCU cable, MC9S12 cable.4. Cross Signal Pins – holds the MCU board, MCU spare cable or DIY signal interface.5. IC Card Induction Area6. Vehicle Key Slot – holds the vehicle key.7. Transponder Slot – holds the transponder.8. Remote Control Transponder Induction Area Figure 2-5 XP400 Views 119. Mercedes Infrared Key Slot – holds the Mercedes infrared key.10. Status LED – indicates the current operating status.11. Locker – locks the EEPROM component transponder slot to ensure proper functioning.12. EEPROM Component Transponder Slot – holds the EEPROM plug-in transponder or EEPROM socket.DC Port : Provides 12 V power supply for the XP400.USB Port: Provides data communication and power supply for handheld device, PC and XP400.DB 26-Pin Port:Five components can be connected to this port:Mercedes Infrared CableAPA102 – Remote Match Cable (optional)APA104 – ECU CableAPA105– MCU CableAPA106 – MC9S12 Cable APA102 – Remote Match Cable (optional) No. Color Definition Pin correspond to DB26 Note 1 Red VCC5V 16 2 Black GND 3/10/25 3 Blue and White REMOTE_MISO 14 4 Gray and White REMOTE_MOSI 5 5 Brown and White REMOTE_CLK 23 6 Green and White REMOTE_RX_C S 15 APA104 – ECU Cable No. Color Definition Pin correspond to DB26 Note 1 Red VCC12V 7 2 Black GND 25 3 Green IGN / 4 Orange CANL 8 5 Blue CANH 17 6 Brown BOOTM / 7 Yellow K 18 8 White LIN 26 APA105 – MCU Cable No. Color Definition Pin correspond to DB26 Note 1 Red and White VPP1 20 2 Red and Black VPP2 12 3 Red and Yellow +12V 7 4 Red and Blue VPPR / 5 Black GND 25 6 White S1 14 7 Brown S2 5 8 Gray S3 23 9 Blue S4 11 10 Red S5 21 11 Orange S6 13 12 Purple S7 4 13 Yellow S8 19 14 Green S9 2 15 Black GND 10 Shielded Twisted 16 White OSC 1 Shielded Twisted APA106 – MC9S12 Cable No. Color Definition Pin correspond to DB26 Note 1 Red +5V 16 2 Black GND 25 3 Green XCLKS 2 4 Blue T/R 11 5 Yellow RESET 19 6 Black GND 10 Shielded Twisted 7 White OSC 1 Shielded Twisted Cross-shaped Signal Pin: Places MCU board, MCU spare cable or DIY signal cable to read or write MCU and ECU chips. IC Card Induction Area: Reads and writes IC card information. Vehicle Key Slot: Holds the vehicle key to read or write vehicle key information. Transponder Slot: Holds the transponder to read or write transponder information. Remote Control Transponder Induction Area: Reads and writes remote control transponder information. Mercedes Infrared Key Slot: Holds Mercedes infrared key to read or write Mercedes vehicle key information. Status LED: Shows the current operating status of the XP400. See the table below for detailed description. Indicator Status Description On Light Green Powered on and default Flash Green Communication Light Red Error Locker : Places EEPROM chip or socket to read or write EEPROM information. EEPROM Component Transponder Slot : Holds the EEPROM plug-in transponder or EEPROM socket. Autel XP400 Adapter Parameter Item Description Operating Temperature -10℃ ~ 60℃ (14℉ ~ 140℉) Storage Temperature -20℃ ~ 60℃ (-4℉ ~ 140℉) Port Mini USB, VGA_DB15 Input Voltage 5 VDC Operating Current < 250 mA Maximum Consumption 1 W Device Dimensions (L*W*H) 130 mm * 68 mm * 28 mm Package Dimensions (L*W*H) 201 mm * 167 mm * 75 mm Net Weight 466 g