Autohex II HW4 BMW Full Package

Using the kit you can do the following: Read old ISN in BMW E series for following Ecus:D62M57A0,  D62M57B0,  D60PSA0,  D50M57A0,  D50M57E1,  D60M47A0,  D60M57A0,  MEV9N46L,  ME9N45,  ME9N62,  ME9E65_6,  N73_L0,  N73_R0,  ME9N62_2,  MSV70,  MS450DS0,  N62_TUE,  N62_TUE2. Read Long ISN (SK) in BMW E series from following Ecus:  MSV80,  MSD80,  MSD81,  MSD85,  MSD85Y,  MSS60,  MEVD176K,  ME17N45,  MED17_2,  MED17_2N,  MEV17_2,  MEV17N46,  MEVD174K, MEVD174KW,  MV1722,  MVD1722,  MEVD172,  MEVD1724,  MEVD1725,  MEVD172Y,  MEVD17KW,  D70N47A0,  D70N47B0,  D71N47A0,  D71N47B0,  D71N47C0,  D71N47D0,  D72N47A0,  D72N47B0,  D73N47A0,  D73N57A0,  D73N57B0,  D73N57C0,  D73N57D0 Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y,  MEVD172,  MEVD1724,  MEVD1725,  N63TU_L0,  N63TU_R0,  S63TU_L0,  S63TU_R0 Read/Write long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function) ISN Reading from Tricore Ecus by boot mode. Individual Programming for any Ecu in BMW E and F series Ecu Swapping if hardware is matched. CAS1, CAS2, CAS3 and CAS3+ read and write ISN and SK Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC) BMW E series EGS ISN matching with CAS BMW F series EGS 6HP and 8HP EWS Resetting BMW E Series, F Series and G Series coding for all Ecus (calculation of Ecucoding is calculated from FA) BMW advanced coding (manual coding) Vehicle order modification and backup and restore from LM,FRM,...ETC Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...) Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver) Unlock security of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM. Read and write ISN of MSD85, MSD87, MSV90 in F series. Ecu Cloning/Tuning for a wide range of brands. This function is free for 90 days (Check Supported Ecu List). Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool. Read and write other modules from BMW, Mercedes, Audi, and others BDM protocol by HexTag tool Modify KOMBI Mileage by HexTag tool Renew all BMW keys, and many other brands by HexTag tool.  Included: Autohex II Hardware WVCI HW 4 The powerful HexTag BDM and Key programmer BMW Software Standard License ISN Boot Mode License BMW Ecu Programming License BMW Key Programming License BMW ISTA/D driver to run dealer software 1 year technical support 1 year hardware warranty 1 year online access to online programming