Crest Audio CKi 400v Professional Installation Amplifier

With their proven track record, CKi amplifiers are designed for the most demanding contractor applications. With the ability to deliver audio, via CobraNet, and control on one CAT5 cable, the CKi series enables contractors and system designers to perform functions that other amplifier manufacturers simply cannot. By using Ethernet technology directly to the amplifier, the CKi series becomes an ultra scaleable system capable of economically powering anything from the smallest building to the largest theme park or stadium.   Features Legendary overbuilt power supply  Rear-mounted attenuators with removable knobs Euro-style connection block, input and output Front panel labeling area Signal present, active, protect and ACL. LEDs (on front and rear of amplifier) PowerSave and sequential turn off (hardwired STO standard on all models) Fault I/O for connection to other monitoring systems Optional input isolation transformers available Five-year warranty PowerSave All CKi amplifiers come standard with PowerSave circuitry.This effectively reduces currentdraw and thermal emissions to a minimum when the amplifier is at idle. PowerSave operates by cutting off the bias current to the output stage after absence of signal is sensed at the input.When signal presents itself, PowerSave instantly restores the bias current after the first positive-going waveform. Current draw specifications while PowerSave is active are included in specifications under “Idle Current Draw.”   Specification Output Power, 70.7V: 200 Watts Max RMS Output Voltage (each channel): 92 Volts Peak Output Voltage (each channel): 130 Volts Frequency Response (+0 / -0.3dB, 1W/70.7V): 10Hz-20kHz, -3dB @148kHz Power Bandwidth (full power, 1% THD+N): 10Hz - 20kHz, +0/-0.2 dB TourClass® Protection ACL, IGM, AutoRamp, short circuit, DC voltage, turnon/off transient, current inrush, sub/ultrasonic input. THD+N (rated power, 1kHz): <0.1% @ 70.7V out SMPTE IMD (rated power, 60Hz & 7kHz): <0.1% @ 70.7V out Input CMRR (1kHz): >60 dB Input Sensitivity (rated power): 1.77V @ 70.7V out Standard Voltage Gain X40 (jumper-selectable for X20 or .775V sens.) Input Impedance (balanced/unbalanced) >20k Ohms / >10k Ohms Hum and Noise (“A” weighted, rated power): -105 dB Crosstalk (“A” weighted, rated power): >-60dB Class: AB Input Connectors (per channel): Rear-panel barrier strip input, 4-pin Phoenix sequential turn-on/off connector on standard CC-STL module Output Connectors (per channel): Rear-panel barrier strip output Filter Storage: 7,800 μF Power Supply (factory configured): 100V-240V, 50-60Hz Idle Current Draw 120V: 0.6A (PowerSave active) 1/8 Power Curr. Draw (typical music, 120V/70.7V): 3.6 A 1/3 Power Curr. Draw (cont. music, 120V/70.7V): 5.1A Max Curr. Draw (breaker rating, 120V/70.7V): 7.0 A Thermal Emissions (1/8 Power, 70.7V): 1304 BTU/hr Thermal Emissions (1/3 Power, 70.7V) 1634 BTU/hr Country of manufacture: United States Cooling: Variable speed, front panel mounted fan, front-to-side airflow Controls: 3-position front panel On/Remote/Off switch, two rearpanel channel attenuators, AC mains circuit breaker Indicators: Signal, ACL (one per ch.) Protect, Active Construction: Steel chassis, 16 guage. Double thickness in rack ear areas. Dimensions: 89 mm x 483 mm x 435 mm (3.5” x 19” x 17.3)