MIDNITE Solar-Charge Controller MPPT 96А MPPT CLASSIC 150

Due to global supply chain constraints lead times for shipments may be delayed. We are actively working with our suppliers to mitigate shortages and improve lead times. If you have questions, please contact your AMRtechnologiesInc. representative at 1-800-213-0227 or submit your question AMRtechsolar@gmail.com MIDNITE Solar-Charge Controller MPPT 96А MPPT CLASSIC 150 About product MidNite Solar Classic 150 controller has MPPT modes for solar, wind, or hydro. Power curves are user-adjustable. Includes a learning mode for self-optimization. Accommodates solar arrays with operating voltages up to 150 VDC. Offers features including arc-fault detection (not currently listed to UL 1699B) and Ground Fault Protection (GFP) which makes a separate GFP breaker assembly unnecessary. Features Midnite Solar Classic 150 - Charge Controller 150 Volt Max ouput current of 96 amps 12-72V Battery charging& HyperVOC protects the controller when open-circuit voltage exceeds the operating voltage by a margin equal to or less than the battery bank voltage. Can be stacked with other Classics to act as one large controller without a separate hub. Built-in Ethernet, USB and RS-232 ports which allow two-way communication. 32 MB of internal memory for data storage. The user can upgrade the firmware using downloaded files. Sealing kit for protection from dusty or salt-air environments. Sealing can reduce output by up to 20%. MidNite 300 VDC breakers are recommended for power-source voltages over 150 VDC. Make sure that the breaker fits into your DC power center, or use a separate MidNite Big Baby Box. Two auxiliary relay outputs. AUX1 can be programmed to either be a 12 VDC output (200 mA max) or as a dry-contact relay (1 A max). AUX2 can either be a 12 VDC output, a logic input or a PWM signal output for diversion load control or for connection to a MidNite Clipper. The Classic charge controller conforms to UL 1741 and CAN/CSA C22.2 No. 107.1:2001/09/01 Ed: 3 (R2006) and is covered by a 5-year warranty. Dimensions are 14.9" x 6" x 4", and weight is 11.5 lbs for all units. Made in the U.S.A. Tools Midnite Solar, Classic 150, MPPT Charge Controller, 150VDC, 96A, 12-72V Battery, with BTS & LCD, Arc-fault Protection, CLASSIC 150 Solar Classic 150 MPPT Battery Charge Controller Specification Battery Charging Voltages Up to 120V battery bank Battery compatibility Lead acid Controller type MPPT Charge Controllers Maximum charging current 96 A Maximum voltage of the solar panels 150 V Dimensions LxWxH 19" x 8.5" x 5.7" Weight 12 lbs Manufacturer Midnite Solar Inc Manufacturer Part # CLASSIC150 Warranty 5-YEAR WARRANTY Delivery Time 5-7 Business Days MidNite Solar Classic 150 controller has MPPT modes for solar, wind, or hydro. Power curves are user-adjustable. Includes a learning mode for self-optimization. Accommodates solar arrays with operating voltages up to 150 VDC. Offers features including arc-fault detection (not currently listed to UL 1699B) and Ground Fault Protection (GFP) which makes a separate GFP breaker assembly unnecessary. Features HyperVOC protects the controller when open-circuit voltage exceeds the operating voltage by a margin equal to or less than the battery bank voltage. Can be stacked with other Classics to act as one large controller without a separate hub. Built-in Ethernet, USB and RS-232 ports which allow two-way communication. 32 MB of internal memory for data storage. The user can upgrade the firmware using downloaded files. Sealing kit for protection from dusty or salt-air environments. Sealing can reduce output by up to 20%. MidNite 300 VDC breakers are recommended for power-source voltages over 150 VDC. Make sure that the breaker fits into your DC power center, or use a separate MidNite Big Baby Box. Two auxiliary relay outputs. AUX1 can be programmed to either be a 12 VDC output (200 mA max) or as a dry-contact relay (1 A max). AUX2 can either be a 12 VDC output, a logic input or a PWM signal output for diversion load control or for connection to a MidNite Clipper. The Classic charge controller conforms to UL 1741 and CAN/CSA C22.2 No. 107.1:2001/09/01 Ed: 3 (R2006) and is covered by a 5-year warranty. Dimensions are 14.9" x 6" x 4", and weight is 11.5 lbs for all units. Made in the U.S.A.   This Product does not include Tax and shipping costs. International shipping is subject to regulations and Import Taxation of Country of destination. AMRtechnologies Inc. Solar & Electrical SystemsTel: (+506) 7037-8077 or Toll Free: 1(800) 2130227Solar Systems in United States & Latin America www.AMRtechsolar.com