Fall Vibes Spider (Distressed) DTF TRANSFER or UV DTF STICKER DECAL

DTF TRANSFER or UV DTF STICKERYay! You're purchasing a DTF TransferDTF Transfers are full color Yes including white! They can be pressed on any type of fabric, have a great feel and hold up wash after wash.DTF Transfers are printed with a white layer on the back so the transfer can be applied on various colors.🤩to order choose the size transfer you would like, if needing more than 1 change quantity in your cart**Size is measured by the longest side🎉We try to keep our processing time as quick as possible, 1-3 COMPLETE BUSINESS DAYS, THIS EXCLUDES HOLIDAYS / WEEKENDS, THIS DOES NOT INCLUDE SHIPPING TIME 🤩If you have any questions, please contact us *TRANSFERS REQUIRE A HEAT PRESS NOT A CRICUT*If YOU choose to use a CRICUT you do so at YOUR OWN RISK, we are NOT responsible if you DO NOT achieve desired results.👚Pressing Recommendations:Pre-Press garment to remove moistureHEAT PRESS: Press transfer with HEAVY pressure at 325 degrees for 15 secondsWait 5 seconds then peel HOT, make sure to peel from the most solid corner of the design.** IF THE TRANSFER IS NOT ADHERING TO THE SHIRT CONFIRM YOU TEMP AND INCREASE YOUR PRESSURE****** IF PRESSING A THICK SWEATSHIRT / HOODIE OR YOUR HAVING TROUBLE WITH THE TRANSFER NOT ADHERING FOLLOW THE ABOVE TIME AND TEMP BUT LET THE TRANSFER COMPLETELY COOL DOWN AND PEEL COLD*******Apply a piece of parchment or Teflon sheet and press for 5 Seconds++ THE TRANSFERS NEED ALOT OF PRESSURE TO ADHERE FOR A HOT PEEL, WE RECOMMEND A HOTRONIC PRESS, IF YOU DON'T HAVE THAT DON'T STRESS ALL OF OUR TRANSFERS WILL ALSO PEEL COLD ++ **TO ENSURE QUALITY CONTROL ALL ORDERS ARE SUBJECT TO BE SHIPPED AS A GANGSHEET ROLL RATHER THAN INDIVIDUAL SHEETS** Enjoy 🤩UV DTF Stickers are amazing to elevate your business or for personal use. UV DTF Stickers are a 3D sticker with a gloss varnish finish that can be applied to a hard surface. UV DTF Sticker Decals Application Instruction1. Clean the Cup or hard surface for glass items wash and dry the glass cup thoroughly.2. Rub or Squeegee the backing of the UV Sticker 3. Peel off backing with design on the clear carrier film4. Place the transfer on the cup/hard surface ensuring design is straight and positioned correctly.5.  Rub / Squeegee  the UV DTF Sticker up, down and from side to side to remove any air bubbles to ensure a good adhesion. 6. Peel carrier film off slowly from to corner and diagonal across, if you notice the UV dtf sticker not adhering lay the carrier film back and a squeegee again. 7. ENJOY you're all done!