Creality Ender Hotend Upgrade Kit
The Creality Ender Upgrade Kit is an all-in-one, hotend upgrade solution for many Creality and Ender printers. This plug-and-play kit eliminates heat creep, prevents clogging, and reduces print time with the Copperhead® Hot Block and Bimetallic Heat Break™. The Creality Ender Upgrade Kit even includes a BridgeMaster® Nozzle and Copperhead Silicone Boot! Plug-and-Play DesignThe Creality Ender Upgrade Kit is a drop-in, plug-and-play replacement for the stock Creality and Ender hotends. Utilizing the stock heat sink, heater, and sensor makes installation a breeze, allowing you to reap the benefits of the Copperhead hotend with minimal printer downtime. Alternatively, you can upgrade to our 50 W Heater and 300°C Thermistor.Bimetallic Heat Break™Copperhead Bimetallic Heat Breaks are 60% more efficient at heat creep reduction than monolithic designs. Using the same high-strength copper alloy designed for optimal thermal conductivity found in Mosquito Heat Breaks, Copperhead Heat Breaks boast a higher temperature rating and flow rate potential over PTFE-lined heat breaks.Super-Conductive Hot BlockThe Copperhead Hot Block is named for its hardened, nickel-plated, copper alloy construction. Rated to 450°C, Copperhead enables printing of nearly every commercially available filament, from basic PLAs to medical-grade PAEKs. The hot block design isolates the sensor from the heater with a physical air gap, improving the temperature feedback loop, and features convenient wrench flats to simplify nozzle changes.Creality Ender Upgrade Kit IncludesCopperhead Hot BlockCopperhead Heat Break - C-EBridgeMaster Nozzle - 0.4 mmCopperhead Silicone BootBoron Nitride Paste - 5 ccDowel Pin (for filling in extra space in the thermistor slot)Gourmet Orange Creamsicle LollipopSlice Engineering Sticker Compatible with:Ender 2Ender 3 / Ender 3 Max / Ender 3 V2 / Ender 3 ProEnder 5 / Ender 5 Pro / Ender 5 PlusEnder 6CR-10 V1 / CR-10S / CR-10-S4 / CR-10-S5 / CR-10 MiniCR-20 / CR-20 ProOther: Tevo Tornado / LONGER LK5 PRO / Tronxy X5S Technical Specifications Cooling: Air Filament Diameter: 1.75 mm Temperature Rating: 450°C Maximum Flow Rate Capacity: 20 mm3/s Nozzle Compatibility: M6 x 1.0 (7 mm thread length) Maximum Heating Power: 50 W (12 or 24 V) Temperature Sensor Compatibility: 15 mm length, ø 3 mm Number of Temperature Sensors: 1 Manufacturing: Made in the USA