iFlight SucceX-D F7 V2.2 Stack (F7+50A ESC)
PRODUCT DESCRIPTION The SucceX-D F7 V2.2 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module. Features Universal USB Type C connector instead of micro USB Plug-and-Play. No need to solder tiny wires.) Supports BLHeli pass-through for easy ESC upgrade and configuration. Designed to support DJI Digital FPV. FC // SucceX-D F7 V2.2 TwinG F722 With Baro MCU: STM32 F722 Gyro：MPU6000 Baro: DPS310 (Barometer can only be used with Betaflight 4.3.0 and above) Blackbox：32MB Betaflight OSD: YES BEC: 5V 2.5A / 9V 2.5A Current sensor scale: 100 Inverter for SBUS input (UART2-RX) Smartaudio & Tramp VTX protocol supported Beeper pad : Yes RSSI input pad: No UARTs：5 Motor outputs: 8 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5) 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V) BLHeli32 Telemetry：RX5 Input voltage：recommended 2-6S, MAX 8S Firmware target: IFLIGHT_F722_TWING Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm Dimensions: 36*36mm Weight: 8.1g USB type-C Changelog: Due to some global supply issues, the Barometer and Flash component was updated as well as some circuit improvements implemented. Before BMP280 changed to DPS310 Before target BTFL4.2.4 changed to IFLIGHT_F722_TWING ESC // SucceX 50A PRODUCT DESCRIPTION Features: - 6 layers double-sided PCB board; - 2OZ copper skin thickness for 1-4 layers,better operating load capacity; - Standard 20*20 Φ4mm mounting holes, rational layout, countersunk holes on extended power soldering pad enable each layer board can be powered; - Supports DShot DShot150/300/600/MultiShot/ OneShot etc. Specification: - Dimension: 31*29.5mm - Mounting Holes: 20*20mm/Φ4mm - Weight: 10.8g - Supports 2-6S lipo input - MCU：G071 - Constant: 55 Amps - Burst: 60 Amps - Current sensor: Yes - BEC: No - Current rate: 100 - Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. - Firmware: BLHeli 32 - Target: iFlight-G071-4IN1 Package Included: - SucceX 55A V2 4-in-1 ESC * 1pc - Power cables & ESC signal wires * 1set