Rich Solar Y Branch Parallel Adapters 2 to 1 RS-Y2

Rich Solar Y Branch Parallel Adapters 2 to 1 The Rich Solar Y Branch Parallel Adapters 2 to 1 RS-Y2 allow two solar panels to be connected in parallel and draw from one output. Perfect for DIYers who are looking to connect multiple solar panels, the RS-Y2 can be reliably used in all solar applications. Features Provides a quick and easy parallel wiring solution for solar panels. Compatible with all solar connectors. Designed for photovoltaic solar systems with high mechanical requirements and extreme weather conditions. Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument. Waterproof and dustproof. Rich Solar RS-Y2 Y Branch Parallel Adapters 2 to 1 Installation Safety First: Ensure that the solar panels are not generating power during the installation process. If your system is already operational, turn it off or disconnect it. Prepare the Cables: If your solar panels don't have pre-installed MC4 connectors, prepare the cables by stripping a small section of insulation from the ends. Identify the positive and negative cables. Install MC4 Connectors (if necessary): If your solar panels don't have pre-installed connectors, crimp or assemble MC4 connectors to the ends of the positive and negative cables. Follow the manufacturer's instructions for the connectors. Connect to the Y Branch Adapter: Plug one end of the MC4 connectors from each solar panel into the female connectors on the Y Branch Parallel Adapter. Make sure to connect the positive and negative cables appropriately. Secure the Connections: Ensure that the MC4 connectors are securely attached to the Y Branch Adapter. Some adapters may have locking mechanisms or require an assembly tool. Follow the manufacturer's instructions. Connect the Y Branch Adapter to the Solar Charge Controller or Inverter: The other end of the Y Branch Adapter has a single male connector. Connect this end to the female MC4 connector on the input side of your solar charge controller or inverter. Secure the Connection: Ensure that the connection between the Y Branch Adapter and the charge controller or inverter is secure. Tighten any screws or locking mechanisms as needed. Weatherproof Connections: To protect the connections from environmental elements, use heat shrink tubing or weatherproof tape. Cover the connectors and a portion of the cable to prevent water ingress. Test the System: Once the connections are complete, turn on the solar power system and check for proper operation. Monitor the system to ensure there are no issues with the connections. Rich Solar Y Branch Parallel Adapters 2 to 1 RS-Y2 Technical Specifications Rated Current: 20A Maximum Voltage: 1000VDC Waterproof: IP67 Wire Range: 12AWG Insulation Material: TPE/PPO Inner Material: Tinned Cooper Temperature Range: -40°C ~ +90°C Safety Degree: Ⅱ