Rich Solar Inline Fuse Holder with 10A 15A 20A 30A Fuse

Rich Solar Inline Fuse Holder with 10A 15A 20A 30A Fuse Stay safe with the Rich Solar Inline Fuse Holder, made from ABS UL94-V0 flame retardant grade material and featuring 10A, 15A, 20A and 30A fuses. This holder is waterproof, dustproof and shockproof so you can trust it to withstand the elements. Enjoy reliable solar power wherever you go! Features Fuse Can Replace 10A/15A/20A/30A fuse embedded into a waterproof fuse holder, solar connector lead on each end. Compatible with PV cables with different insulation diameters. Designed for a wide range of DC applications. Simple plug-and-play. Auto-lock equipment of male and female points render connections easy and reliable. Waterproof fuse holder - IP67 Class Protection. Insulation material PPO. High current-carrying capacity. Prevent large currents from damaging the solar panels.  Designed to provide complete single circuit protection to your solar power array.  Protection Class II Connector adopts touch and insertion of reed with inner-knob type. Purchase this product for extra protection on your system. Rich Solar RS-SC10F Inline Fuse Holder with 10A 15A 20A 30A Fuse Installation Cut and Strip the Wire: Cut the wire at the desired location where you want to install the fuse holder. Strip about 1/2 inch (1.27 cm) of insulation from both ends of the cut wire using a wire stripper. Prepare the Fuse Holder: Open the fuse holder by unscrewing the cap or removing any covers. Take note of the two ends labeled "Input" and "Output." Insert the Wire: Insert one stripped end of the wire into the "Input" side of the fuse holder. Insert the other stripped end into the "Output" side. Crimp the Wire: Use a crimping tool to secure the wire in place on both the "Input" and "Output" terminals of the fuse holder. This ensures a solid connection. Install the Fuse: Select the appropriate fuse based on your electrical needs (10A, 15A, 20A, or 30A). Insert the fuse into the fuse holder. Close and Secure: Close the fuse holder by tightening the cap or securing any covers that were removed. Ensure that the fuse is properly seated and secure. Optional: Use Heat Shrink Tubing: If you want additional protection and insulation, you can use heat shrink tubing. Slide the heat shrink tubing over the crimped connections. Use a heat source (heat gun or lighter) to shrink the tubing and provide a secure covering. Test the Circuit: Before sealing everything completely, test the circuit to ensure that the fuse holder is working correctly. Secure the Fuse Holder: Mount the fuse holder in a suitable location, ensuring that it is secure and won't be exposed to excessive moisture or heat. Final Check: Double-check all connections and make sure everything is properly secured before closing the installation. Rich Solar Inline Fuse Holder with 10A 15A 20A 30A Fuse RS-SC10F Technical Specifications Rated Current: 10A/15A/20A/30A  Degree of Protection: IP2*/IP67 Rated Voltage: 1000 V DC  Flame Class: UL94-V0 Test Voltage: 6000V (50Hz,1 min)  Safety Class: II Overvoltage Category: CATIII  Suitable Connector: Solar Connector Contact Resistance of Plug Connector: 1mΩ  Insertion Force / Withdrawal Force: ≤50N / ≥50N Contact Material: Copper, Silver Plated  Insulation Material: PPO  Temperature Range: -40 to +125°C