2pcs 1 inch (25mm) Chevy Hubcentric (70.5 Hub) Wheel Spacers for Camaro Corvette S10 Blazer GMC Sonoma S15 Jimmy

This Wheel Spacer Kit Comes with Everything Needed for a Full Installation! Specifications Vehicle Bolt Pattern: 5x4.75 Wheel Bolt Pattern: 5x4.75 Hub Bore: 70.5mm Thread Pitch: 12x1.5 Thickness: Each Adapter Measures 1 inch Thick Vehicle Fitments THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES 2004-2009 Cadillac XLR/li 1982-2002 Chevy Camaro/li 1988-2017 Chevy Corvette/li 1982-2004 Chevy S10 / S10 Blazer (Does not work with 2WD Front Hubs)/li 1982-1991 GMC S15 / S15 Jimmy (Does not work with 2WD Front Hubs)/li 1991-2004 GMC Sonoma/li 1982-2002 Pontiac Firebird Additional Information Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle Installation needs to be performed by a trained professional Its Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options: Your lugs studs will need to be shortened by grinding them down You can replace your studs will shorter studs if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush) ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS Age Group: adult.