585C Chain Driven Camshaft Kit - 106-4382

Cams for Twin Cam 00-06 are for use with stock splined drive gears; for installation on Twin Cam 99 motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART NO. H11-120 be used Cams for Dyna 06 and Twin Cam 07-10 are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs Made in the U.S.A. NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance 585C Designed for 88 in. to 95 in. engines with compression ratios from 10 to 10.5:1 and 100 in. and 107 in. engines with ratios 9.7:1 to 10.5:1 Intake: Open: 20 degree Close: 45 degree Duration @ .053: 245 degree Valve Lift: .585 Exhaust: Open: 60 degree Close: 20 degree Duration @ .053: 260 degree Valve Lift: .585 Included Items:  (2) Chain drive cams (1) front, (1) rear (2) 25x32x3 Needle bearings (2) Small O-rings (1) Large O-ring (1) Cam cover gasket (1) 5ml Tube of loctite® 262 (1) 5ml Tube of loctite® 243 Instructions   The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.