Extruder OMG V2S All Metal Gears For 3D Printer Part Update CR10 Ender 3 V2 Direct Dual Drive D1 DM1 SET
SPECIFICATIONSOrigin: Mainland ChinaItem Type: ExtruderBrand Name: DIYMARIA OMG V2S Extruder All metal CNC ,1:3 Gear Ratio6 Precision Miniature Bearings2 times the squeeze powerUniversal left and right hand supportDouble spring pressure adjustmentMetal gears Heat Treated GearsHardness HRC60Warranty time greater than: 10000 hours Setting Adjustment 1/ Need Adjust Motor drive voltage to 0.6v 2/ E-STEP 3Recommended Retraction SettingDIRECT DRIVE :Speed 5-10mm/s Distance: 0.5 mmLONG-DISTANCE FEEDING FILAMENT :Speed 10-20 mm/s Distance 1-2mmmore inf. User Manualwww.my3dtech.de D1-B-SET D1-B-SET does not include motorUse the original 42 stepping motor E-step 363It is recommended to adjust the voltage to half of the original value DM1-B-set DM1-B-set include stepper motorsJapan ASPINA step angle 0.9 E-Step: 726 Direct extrusion DM1 D1 SET --Suitable for hot endHot end thread is M6*1 M10*1 1/8 such as commonly used E3D etc. 2 point direct drive 2 extruders work at the same time 2 times the power to feed the filamentOn the basis of ensuring the movement of the filament, reduce the damage and breakage of the filament by the gear Heat Treated Gears Filament engagement gear material Die steelHeat Treatment HRC60Compatible Filament: Carbon Fiber TPU ABS ...Warranty time more than: 10000 hours Youtube Thanks for providing the video installation video:Sister Aurora Lung and brother Helios from Danville, Californiahttps://www.youtube.com/watch?v=wx0FEp3uB2IDr. Igor Gaspar (mechanical engineer) as a teacher and researcher at MATE University, Budapesthttps://www.youtube.com/watch?v=dvHlawF66NwCanal Tornillohttps://www.youtube.com/watch?v=GqHIPY4EYzY Step angle: 0.9° Customized Japan SHINANO ASPINAMade in China Model: SST36C1080-16https://jp.aspina-group.com/ja/products/motors/cat01/001/Weight: 95g Gear clearance adjustment 1/ 4 pcs screws to rotate the fixed extruder and motor2/ Adjust the gap between the motor gear and the extruder gear3/ Standard: Free rotation without backlash4/ Tighten the 4 extruder and motor screws Adjust the spring pressure Hold down the big gear, keep it still, pull the filament,